DSC-S730 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 5

Read Sony DSC-S730 (serv.man2) Service Manual online

5-4
DSC-S730_ADJ
5-2-2. Aperture Diameter/Mechanical Shutter Adjustment
The Aperture Diameter/Mechanical Shutter adjustment order is as follows.
Small pattern box setting:
Color temperature = 3000 
±
 300K
Adjustment order
Screen display
The adjustment finished normally.
   The adjustment is finished abnormally.
Fig. 5-2-4
      Fig. 5-2-5
      Fig. 5-2-6
      Fig. 5-2-7
      Fig. 5-2-8
Set the unit to the adjustment mode.
* For the setting procedure of the adjustment mode, refer to "Preparations" (Page 5-2).
Place the camera in front of the small pattern box.
Press the control button “v”, then Aperture Diameter/Mechanical Shutter Adjustment starts.
Confirm the indication
on the screen.
Finished normally.
Finished abnormally.
In case of the adjustment is finished normally. 
the adjustment completion indication appears 
on the screen. (Fig. 5-2-4)
Turn off the power to quit the adjustment mode.
In case of the adjustment is finished abnormally. 
the following indication appears on the screen.
(Fig. 5-2-5 to 5-2-8)
In this case, confirm the adjusting environment 
and readjust.
DarkLumi O
OK O O O
MTrigger8 95
ExpoTime86665
MShutter Adjust...
O MSHUTTER: 95  95  96
The adjustment is complete.
X  ADJUST IRIS NG
Malfunction of Aperture
Diameter adjustment
O ADJUST IRIS OK
X  MSHUTTER No Close
Malfunction of Mechanical
Shutter adjustment
O ADJUST IRIS OK
X   Mshutter Speed too big
O ADJUST IRIS OK
X   Mshutter Speed too Small
Malfunction of Mechanical
Shutter adjustment
Malfunction of Mechanical
Shutter adjustment
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.1 2008.09
Page of 9
Display

Click on the first or last page to see other DSC-S730 (serv.man2) service manuals if exist.