Read Sony DSC-S70 (serv.man2) Service Manual online
1-2
Getting star
ted
7
A PROGRAM AE button (42)
B LCD ON/OFF button
C Finder
Self-timer/recording lamp (red)
AE lock lamp (green)
Strobe charge lamp (orange)
AE lock lamp (green)
Strobe charge lamp (orange)
D FOCUS button (41)
E Flash button
F LCD screen
G POWER switch
H VOLUME +/– button
PROGRAM AE +/– button
I DISPLAY button
J Hook for lens cap/strap
K Zoom button
L Access lamp (15)
M Battery/“Memory Stick” cover
N Battery eject lever (8)
O OPEN switch
P Control button
Q DC IN jack (9) (12)
R POWER lamp
Attaching the strap
8
Preparing the power supply
Installing the battery pack
Your camera operates only with the “InfoLITHIUM” NP-FM50 battery pack* (M
series). You cannot use any other battery pack.
series). You cannot use any other battery pack.
To remove the battery pack
Open the battery/“Memory Stick” cover. Slide the battery eject lever
downward, and remove the battery pack.
downward, and remove the battery pack.
Be careful not to drop the battery pack when removing it.
* What is “InfoLITHIUM”?
“InfoLITHIUM” is a lithium ion battery pack which can exchange information such as battery
consumption with compatible video equipment. This unit is compatible with the
“InfoLITHIUM” battery pack (M series). “InfoLITHIUM” M series battery packs have the
“InfoLITHIUM” is a lithium ion battery pack which can exchange information such as battery
consumption with compatible video equipment. This unit is compatible with the
“InfoLITHIUM” battery pack (M series). “InfoLITHIUM” M series battery packs have the
mark. “InfoLITHIUM” is a trademark of Sony Corporation.
1
Open the battery/“Memory Stick” cover.
Open the cover while sliding the OPEN switch in the direction of the arrow.
Open the cover while sliding the OPEN switch in the direction of the arrow.
2
Install the battery pack.
Insert the battery pack with the B mark facing toward the battery compartment
as illustrated.
Insert the battery pack with the B mark facing toward the battery compartment
as illustrated.
3
Close the battery/“Memory Stick” cover.
Battery eject lever
Getting star
ted
9
Charging the battery pack
You cannot charge the battery pack while your camera is turned on. Be sure to turn
off your camera before charging.
off your camera before charging.
Battery remaining indicator
The LCD screen on the camera shows the remaining time for which you can still
record or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
record or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
Auto power-off function
If you do not operate the camera for about three minutes during recording, the
camera turns off automatically to prevent wearing down the battery. To use the
camera again, slide down the POWER switch to turn on the camera again.
camera turns off automatically to prevent wearing down the battery. To use the
camera again, slide down the POWER switch to turn on the camera again.
1
Insert the battery pack into your camera.
2
Open the DC IN jack cover and connect the DC connecting cable to
the DC IN jack of your camera with the v mark facing up.
the DC IN jack of your camera with the v mark facing up.
3
Connect the power cord (mains lead) to the AC power adaptor and
then to a wall outlet (mains).
The CHARGE lamp in the display window flashes when charging begins.
When the CHARGE lamp goes off, normal charge is completed. For full
charge, which allows you to use the battery longer than usual, leave the
battery pack inserted for about one hour after normal charge is completed until
the battery remaining indicator and “FULL” is displayed alternately in the
display window.
then to a wall outlet (mains).
The CHARGE lamp in the display window flashes when charging begins.
When the CHARGE lamp goes off, normal charge is completed. For full
charge, which allows you to use the battery longer than usual, leave the
battery pack inserted for about one hour after normal charge is completed until
the battery remaining indicator and “FULL” is displayed alternately in the
display window.
AC-L10 AC power adaptor
DC IN jack cover
To the wall outlet (mains)
Battery pack (M series)
Power cord
(mains lead)
10
Approximate time to charge a completely discharged battery pack using the AC-L10
AC power adaptor.
AC power adaptor.
STILL mode recording*
STILL mode playback**
Approximate battery life and number of images that can be recorded/played back
with a fully charged battery pack at a temperature of 77˚F (25˚C), 640
with a fully charged battery pack at a temperature of 77˚F (25˚C), 640
×
480 image
size and in NORMAL recording mode. Numbers in parentheses indicate the time
when you use a normally charged battery pack.
when you use a normally charged battery pack.
∗
Recording at about 4-second intervals
∗∗
Playing back single images in order at about 3-second intervals
MOVIE mode recording
Approximate time that can be recorded with a fully charged battery pack at a
temperature of 77˚F (25˚C) and 160
temperature of 77˚F (25˚C) and 160
×
112 image size. Numbers in parentheses
indicate the time when you use a normally charged battery pack.
Charging time
Battery pack
Full charge (min.)
Normal charge (min.)
NP-FM50 (supplied)
150
90
Battery life and number of images that can be recorded/played back
NP-FM50 (supplied)
Battery life (min.)
Number of images
LCD screen ON
120 (110)
1600 (1400)
LCD screen OFF
150 (140)
2000 (1800)
NP-FM50 (supplied)
Battery life (min.)
Number of images
LCD screen ON
220 (210)
4400 (4200)
NP-FM50 (supplied)
LCD screen OFF (min.) LCD screen ON (min.)
Continuous recording
150 (140)
130 (120)
Click on the first or last page to see other DSC-S70 (serv.man2) service manuals if exist.