DSC-S600 (serv.man11) - Sony Digital Camera Service Manual (repair manual). Page 7

1-3E

DSC-S600_L2

Cabinet (front) assembly

LB-117 board

Remove the claw

LB-117 board

S101 switch
(Lens barrier open)

SW-461 board

Adhesive tape

solder the leads

Remove the LB-117 board from the cabinet (front) asembly, solder the leads to the SW-461 board, and fix the S101 switch (Lens barrier 
open) to the ON position with an adhesive tape.

• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not required.
• Perform “Initial Language Data Check” mentioned below, and also the adjustment items necessary after SY Board replacement.

If the SY-145 board was replaced, initial language setting may be changed. Accordingly, change the following data so as to set same initial
language as that of the set distributing in each region.

Initial language: Language displayed at the next starting if the setting of Setup menu was reset.

It is different from the language setting selectable with the menu.

GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.

Writing Method:
1)

Select page: 00, address: 01 and set data: 01.

2)

Select page: 4F, address: 8C, and set the Initial Language Data.

3)

Select page: 40, address: 38, and set data: 00.

4)

Click [Save] on the SEUS screen.

5)

Select page: 80, address: 34, and check that the data is “00”.

6)

Select page: 80, address: 30, and check that the data is “00”.

7)

Select page: 00, address: 01, and set data: 00.

8)

Turn off the camera.

9)

Turn on the camera. Execute “Initialize” of Setup screen.

10) Check the language displayed when the camera starts.

Page

Address

Data

Language

GP2

GP3

GP4

4F

8C

00

English

z

z

z

04

Spanish

z

z

06

Portugal

z

08

Simplified Chinese

z

0B

Russian

z

0D

Korean

z