DSC-S5000 - Sony Digital Camera Service Manual (repair manual). Page 24

DSC-S5000

3-16

LCD display

2-4-3. Move(*) the camera with the tripod to display the chart on LCD as the following picture.  

(*) Avoid the tilt of the camera face against the chart.  

2-4-4. Align the camera position(*) to the center of the chart.  

(*) Adjust the position of the tripod vertically and horizontally with referring to the reflected image.   

2-4-5. Reconfirm the conditions of 2-4-3. and 2-4-4. If OK, remove the mirror.   

3. Shooting 

3-1. Set to [Self-Timer] mode.  
3-2. Take the shot by the camera installed re-assemble lens.  
3-3. Take the shot by the test camera for comparing with the same condition.  

Display the frame* like in this 
picture.  
* Whole square frame should 
be displayed.   

 

Refer to the reflected image in the mirror.  
Adjust the position so that the center of Lens part 
overlaps with the center of the chart.  

4. Checking and judging  

4-1. Check the shot images on PC.  

- Display at the same magnification of its Pixel. (100% display)  

4-2. Compare the images by the repaired camera and the test camera.  

- There should not be extreme focus blurring  
- It should be distinguished the black and white by the sharpness between them.  
- If it is in NG level, replace the lens unit.  

 

 

Check the five parts (center and 4 surrounding areas) at the same magnification.