Read Sony DSC-S3000 (serv.man2) Service Manual online
DSC-S3000_ADJ
Sony Corporation
Revision History
SECTION 5
ADJUSTMENT
ADJ
983456151.pdf
2011B29-1
© 2011.02
Published by Sony Techno Create Corporation
Ver. 1.0 2011.02
9-834-561-51
DSC-S3000
Link
• PREPARATIONS
• Adjustment Items When Replacing CCD
Block, Lens Block and Main Board
• List of Service Tools and Equipment
• Keys and Functions
• Connecting the Equipment
• Setting the Adjustment Mode
• Keys and Functions
• Connecting the Equipment
• Setting the Adjustment Mode
• CAMERA SECTION ADJUSTMENTS
• Iris/Mechanical Shutter/Bad Pixel
Adjustment
• Zoom Adjustment
• Far Focus Adjustment
• Near Focus Adjustment
• White Balance Adjustment
• Set Language Destination
• Far Focus Adjustment
• Near Focus Adjustment
• White Balance Adjustment
• Set Language Destination
• PRODUCT ID LIST
Ver.
Date
History
Contents
S.M. Rev.
issued
1.0
2011.02
Official Release
—
—
DSC-S3000_ADJ
5-2
5. ADJUSTMENT
5-1. PREPARATIONS
5-1-2. List of Service Tools and Equipment
5-1-3. Keys and Functions
Following are keys and functions used in adjustment. (Fig. 5-1-2)
Note:
For the chart, search “J-6082-563-A” in the JIG & Software on ESI homepage, download the PDF file and print out it on the A4 size whitepaper.
5-1-4. Connecting the Equipment
Insert the SD-Card or Memory Stick PRO Duo and the Nickel-Metal Hydride batteries as shown below. (Fig. 5-1-3)
Note:
Use the fully charged Nickel-Metal Hydride batteries in adjustment.
Set the camera on the Camera table. (Fig. 5-1-4)
5-1-1. Adjustment Items When Replacing CCD Block, Lens Block and Main Board
When replacing these parts, adjust the items indicated by “ z ” in the following table.
Adjustment
Replaced parts
CCD block
Lens block
Main board
Iris/Mechanical Shutter/Bad Pixel
Adjustment
z
z
z
Zoom Adjustment
z
z
Far Focus Adjustment
z
z
Near Focus Adjustment
z
z
White Balance Adjustment
z
z
z
Set Language Destination
z
Fig. 5-1-1
J-5
Small pattern box
PTB-1450
J-6082-557-A
J-4
J-3
Chart
(Note)
J-6
HR 15/51:HR 6 (size AA)
Nickel-Metal Hydride
batteries (× 2)
Camera table
J-6082-384-A
J-1
SD-Card
or
SONY
Memory Stick PRO Duo
(256 MB or more)
J-2
Mini flange back jig
J-6082-719-A
or
Flange back
adjustment jig
J-6082-563-A
Fig. 5-1-2
ON/OFF (Power) button
Shutter button (Key S1)
MENU button
(Delete) button
Control button
button (Key OK)
button (Key Right)
button (Key Up)
button (Key Left)
button (Key Down)
Mode switch
Still image
ON/OFF (Power) lamp
Fig. 5-1-4
Camera table
(J-6082-384-A)
Ensure the notched corner faces correctly.
Fig. 5-1-3
DSC-S3000_ADJ
5-3
Pressing the MENU button, the adjustment is completed and the initial screen for the adjustments appears.
To continue the adjustment, perform the operations mentioned from the next page.
When all adjustments are completed, press the ON/OFF (Power) button to finish the adjustment operations.
5-1-5. Setting the Adjustment Mode
1) Download the firmware file “SDCA453C_[][][]ADJ.zip” from the ESI homepage.
Uncompress the “SDCA453C_[][][]ADJ.zip”, then confirm that it includes the following items.
• SDCA453C.bin
2) Save the uncompressed file “SDCA453C.bin” in the root directory of the SD-Card or Memory Stick PRO Duo after formatting it.
And also save the file of “lang.txt” in the root directory SD-Card or Memory Stick PRO Duo when replacing Main board.
Refer to “5-2-6. Set Language Destination” (Page 5-7) for “lang.txt”.
Note:
Saving it in other directories causes a malfunction of program.
When formatting, perform on the PC, using the FAT. Do not format on the camera.
(If the concealed file “MEMSTICK.IND” is still remained after formatting, delete it.)
3) With the camera turned off, set the Mode switch to Still image and insert the SD-Card or Memory Stick PRO Duo with the “SDCA453C.bin”
into the Memory card slot of the camera.
4) While pressing the (Delete) button, press the ON/OFF (Power) button, then release when the ON/OFF (Power) lamp turns on and the Cyber-shot
logo appears on the LCD display.
5) The LCD display will turn white for a moment, and release the (Delete) button when the Cyber-shot logo appears on the LCD display again.
6) After several seconds, the adjustment mode screen appears. (Fig. 5-1-5)
Key OK: WB/ISO Adjust
Key Down: Zoom Adjust
Key Left: Far Focus Adjust
Key Right: Near Focus Adjst
Key Up: MS/BP Adjustey
Key S1: Set Lang Destination
Fig. 5-1-5
DSC-S3000_ADJ
5-4
5-2. CAMERA SECTION ADJUSTMENTS
5-2-1. Iris/Mechanical Shutter/Bad Pixel Adjustment
The Iris/Mechanical Shutter/Bad Pixel Adjustment order is as follows.
Small pattern box (PTB-1450) setting:
Color temperature = 3150 ± 50K
Luminance: LV12.3 ± 0.2
Adjustment order
Screen display
The adjustment finished normally.
The adjustment finished normally.
O ADJUST IRIS OK
O Mshutter OK
O Mshutter OK
O Still Pixel OK
O PreviewPixel OK
Fig. 5-2-2
The adjustment is complete
The adjustment is finished abnormally.
X ADJUST IRIS NG
O Mshutter OK
O Still Pixel OK
O PreviewPixel OK
Fig. 5-2-3
Malfunction of Iris adjustment
O PreviewPixel OK
O Still Pixel OK
O Still Pixel OK
O ADJUST IRIS OK
X Mshutter NG
O PreviewPixel OK
O Still Pixel OK
O Still Pixel OK
Fig. 5-2-4
Malfunction of Mechanical
Shutter adjustment
O ADJUST IRIS OK
X PreviewPixel NG
O Mshutter OK
O Still Pixel OK
Fig. 5-2-5
Malfunction of Preview Pixel
adjustment
Set the camera to the adjustment mode.
Place the camera in front of the Small pattern box (PTB-1450). (Fig. 5-2-1)
Press the control button “ v (Key Up)”, then Iris/Mechanical Shutter/Bad Pixel Adjustment starts.
Confirm the indication
on the screen.
Finished normally.
Finished abnormally.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 5-2-3 to 5-2-14)
In this case, confirm the adjusting environment
and readjust.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
the adjustment completion indication appears
on the screen. (Fig. 5-2-2)
In case of the adjustment is finished normally,
Turn off the power to quit the adjustment mode.
The adjustment is finished abnormally.
O ADJUST IRIS OK
X Still Pixel NG
O Mshutter OK
O PreviewPixel OK
O PreviewPixel OK
Fig. 5-2-6
Malfunction of Still Pixel adjust-
ment
X ADJUST IRIS NG
O Still Pixel OK
O PreviewPixel OK
X Mshutter NG
Fig. 5-2-7
Malfunction of Iris & Mechani-
cal Shutter adjustment
X PreviewPixel NG
O Mshutter OK
O Still Pixel OK
X ADJUST IRIS NG
Fig. 5-2-8
Malfunction of Iris & Preview
Pixel adjustment
X Still Pixel NG
O Mshutter OK
O PreviewPixel OK
O PreviewPixel OK
X ADJUST IRIS NG
Fig. 5-2-9
Malfunction of Iris & Still Pixel
adjustment
X ADJUST IRIS NG
X Mshutter NG
X PreviewPixel NG
X Mshutter NG
X PreviewPixel NG
O Still Pixel OK
Fig. 5-2-10
Malfunction of Iris, Mechanical
Shutter & Preview Pixel adjust-
ment
X PreviewPixel NG
O Mshutter OK
X ADJUST IRIS NG
X Still Pixel NG
Fig. 5-2-11
Malfunction of Iris, Preview
Pixel & Still Pixel adjustment
X ADJUST IRIS NG
O PreviewPixel OK
X Mshutter NG
X Still Pixel NG
Fig. 5-2-12
Malfunction of Iris, Mechanical
Shutter & Still Pixel adjustment
X Mshutter NG
X Still Pixel NG
O ADJUST IRIS OK
X PreviewPixel NG
Fig. 5-2-13
Malfunction of Mechanical
Shutter, Preview Pixel & Still
Pixel adjustment
X ADJUST IRIS NG
X Mshutter NG
X PreviewPixel NG
X Still Pixel NG
X Mshutter NG
X PreviewPixel NG
X Still Pixel NG
Fig. 5-2-14
Malfunction of all adjustments
Fig. 5-2-1
Equipment required: Small pattern box (PTB-1450)
Small pattern box
(PTB-1450)
0.5 to 1.0 cm
Camera
