DSC-RX100M2 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 7

DSC-RX100M2_L2

1-4

Perform the following procedure to check the Wi-Fi function.

Required equipment: Windows personal computer with Wi-Fi interface

1.  Turn on the power of the unit.
2.  Perform the following operations.
 MENU 

→ 

 → [Ctrl with Smartphone] → ●

3.  When preparation for Wi-Fi has been completed, the following screen opens and a password for Wi-Fi connection is displayed.

Ctrl with Smartphone

Operate smartphone to connect to

this device via Wi-Fi.

Enter

SSID DIRECT-XXXX:DSC-XXXXXXX
Password XXXXXXXX
Device Name DSC-XXXX

Cancel

4.  Confirm on the personal computer that the unit is detected as a connectable wireless network.
5.  To further confirm that the unit is connectable, connect the unit to the personal computer and select “Network and Internet” → “Manage Wireless 

Networks” from Control Panel to open the network connection list. The unit is included in the list.

When problems occur while the unit is operating, the self-diagnosis 
function starts working, and displays on the LCD screen what to do.
Details of the self-diagnosis functions are provided in the Instruction 
manual.

When problems occur while the unit is operating, the LCD screen shows 
a 4-digit display consisting of an alphabet and numbers, which blinks 
at 3.2 Hz. This 5-character display indicates the “repaired by:”, “block” 
in which the problem occurred, and “detailed code” of the problem.

0 0

3 2

C

Repaired by:

Refer to “1-5-3. Self-diagnosis Code Tabl e”.

Indicates the appropriate

step to be taken.

E.g.
13 ....Format the “memory card”.
32 ....Turn on power again.

Block

Detailed Code

Blinks at 3.2 Hz

C : Corrected by customer

E : Corrected by service

engineer

LCD screen