DSC-RX100M2 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 30

DSC-RX100M2_L2

3-1E

Assembly-1: Notes on installing the speaker and antennas.

NFC antenna assy

Antenna
(Wi-Fi)

Arrange these harnesses as shown in the figure.
- Harness of the antenna (Wi-Fi)
- Harness of the loudspeaker
- Harness of the NFC antenna assy

Loudspeaker

Loudspeaker

NFC antenna assy

NFC antenna assy

Antenna
(Wi-Fi)

Harness of the
antenna (Wi-Fi)

Avoid overlapping the board
with the harness as much
as possible so as not to
impair functions.

Board

Assembly-2: Assembling method of the FL-217 flexible board.

2 FL-217 
     flexible board

1 FL flexible 
    sheet (500)

4 Sheet (ST-F)

Connector

3 ST flexible 
    cover (500),
    magnet

5 ST cover (500)

ST block assy

FL-217
flexible board

Pass the FL-217 flexible Board 
through the ST block and connect 
the FL-217 flexible board to the 
connector.

Assembly-3: Notes on assembling the LCD panel.

Adhesive sheet (LCD) (710)

LCD panel

LC cabinet (rear) (710)

Carefully stick the adhesive sheet (LCD) (710) to the LC cabinet
(rear) (710).

Pass the LCD's Flexible Board through the LC cabinet (rear) (710) 
and push the entire LCD evenly together with the adhesive sheet
(LCD) (710) for five seconds.

Check the following.
- There shall be no gap of the panel.
- There shall be no problem with the LCD after power-on.

Assembly-4: Notes on assembling the BT-2007 flexible board.

mountain fold

mountain fold

valley fold

valley fold

valley fold

 BT-2007 flexible board

Assembly-5: Notes on assembling the lens block.

1

2 mountain fold

notch part

valley fold