DSC-RX10 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 14

DSC-RX10_L2

1-11E

3.  Gently fold the Flexible Board and insert the 3 Group Lens Frame Block Assy into the Straight Tube Block Assy.
4.  Turn the Iris 3-4 Group Lens Frame Block Assy clockwise about 10 degrees to further insert it.

 

10

approx.

Iris 3-4 Group Lens 
Frame Block Assy

Flexible Board

5.  Confirm that the Flexible Board is placed in the concave of the Cam Tube.
6. Match 

the 

△ mark on the Straight Tube Block Assy with the fin of Cam Tube.

 

Concave of Cam Tube

mark

Fin of Straight 
Tube Block Assy

Rib

Rib

7.  Install the Thrust Plate.
8.  Pull the Flexible Board out of the hole of the Rear Tube Mirror Block Assy and install the Rear Tube Mirror Block Assy with four screws.

 

Thrust Plate

Flexible Board

Hook

Rear Tube Mirror 
Block Assy

9.  Fully turn the Cam tube counterclockwise.
10. Install the 2 Group Lens Frame Block Assy.
11.  Install the 1 Group Lens Frame Block Assy and fully turn the gear of the Cam Tube clockwise.

 

2 Group Lens 
Frame Block Assy

Cam Tube

1 Group Lens 
Frame Block Assy

Gear of the Cam Tube

12. Install the Zoom Gear Assy with three screws.
13. Install the FG Retainer.

 

Zoom Gear Assy

FG Retainer

Hooks

Rib

Rib

Rib

14. Perform the Flange Back Adjustment after the assembling.