DSC-P92 (serv.man3) - Sony Digital Camera Service Manual (repair manual). Page 3

— 3 —

1.

Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.

2.

Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.

3.

Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.

4.

Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.

5.

Check the B+ voltage to see it is at the values specified.

6.

Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270˚C

during repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

Make sure that the following accessories are supplied with your camcorder.

Battery charger (BC-CS2)(1)
(US,CND,JE,J model)

0

 1-477-814-11

Battery charger (BC-CS2)(1)
(AEP,UK,E,HK,AUS,BR model)

0

 1-477-814-21

Battery charger (BC-CS2)(1)
(CH, KR model)

0

 1-477-814-32

Memory stick  (1)
(MSA-16A)
(not supplied)

Hand strap (1)
3-070-841-01

Connection cord
(AV Cable 1.5m)(1)
1-824-111-11

CD-ROM (USB DRIVER) (1)
(SPVD-010)
(AEP,UK,E,HK,AUS,
CH,JE,KR,BR model)
3-078-942-03
CD-ROM (USB DRIVER) (1)
(SPVD-010 (I)) (US,CND,J model)
3-078-943-03

2P conversion adaptor (1)
(JE model)
1-569-007-12

2P conversion adaptor (1)
(E model)
1-569-008-12

Note :
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.

Note :
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.

Cord with connector (1)
(USB 5P)
1-827-038-11

• Abbreviation

CND : Canadian model
HK

: Hong Kong model

AUS : Australian model
CH

: Chinese model

Battery carrying case (1)
3-074-757-01

JE

: Tourist model

KR

: Korea model

BR

: Brazilian model

J

: Japanese model

HR6 (size AA) Ni-MH
batteries
(not supplied)

not supplied

MANUAL, INSTRUCTION (JAPANESE)(J)

3-082-718-01 MANUAL, INSTRUCTION (JAPANESE)(J)
3-082-719-01 MANUAL, INSTRUCTION (SET)(JAPANESE)(J)
3-082-719-11 MANUAL, INSTRUCTION (ENGLISH)

(US,CND,AEP,UK,E,HK,AUS,CH,JE)

3-082-719-21 MANUAL, INSTRUCTION (FRENCH/GERMAN)(CND,AEP)

3-082-719-31 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE)

(AEP,E,JE)

3-082-719-41 MANUAL, INSTRUCTION (ITALIAN/DUTCH)(AEP)
3-082-719-51 MANUAL, INSTRUCTION (CHINESE)(E,HK,CH,JE)
3-082-719-61 MANUAL, INSTRUCTION (RUSSIAN/SWEDISH)(AEP)
3-082-719-71 MANUAL, INSTRUCTION (ARABIC)(E)

3-082-719-81 MANUAL, INSTRUCTION (KOREAN)(KR)

Power cord (1)(AUS model)

0

 1-696-819-21

Power cord (1)(AEP,E model)

0

 1-769-608-11

Power cord (1)(CH model)

0

 1-782-476-13

Power cord (1)(KR model)

0

 1-776-985-11

Power cord (1)(UK,HK model)

0

 1-783-374-11

Power cord (1)(US,CND model)

0

 1-790-107-22

Power cord (1)(JE,J model)

0

 1-790-732-12