Read Sony DSC-P52 (serv.man4) Service Manual online
6-16
DSC-P52
4. Flange Back Check
Mode
STILL (
)
Subject
Siemens star
(1.0 m from the front of the lens)
(Luminance : approx. 300 lux)
(1.0 m from the front of the lens)
(Luminance : approx. 300 lux)
Measurement Point
Check operation on TV monitor
Measuring Instrument
Specified Value
The lens is focused.
Switch setting:
CAMERA setting (Menu setting) ................................ AUTO
Checking method:
1)
1)
Place the siemens star 1.0m from the front of the lens.
2)
Select page: 5F, address: 3D, read the data, and memorize it.
Then set data: 50.
Then set data: 50.
3)
Select page: 7B, address: 98, read the data, and memorize it.
Then set data: A0.
Then set data: A0.
4)
Shoot the siemens star with the zoom TELE end.
5)
To open the IRIS, decrease the luminous intensity to the siemens
star up to a point before noise appear on the image.
star up to a point before noise appear on the image.
6)
Observe the TV monitor and check that the lens is focused.
7)
Select page: 60, address: 2C, and set data: 01.
8)
Shoot the siemens star with the zoom WIDE end.
9)
Observe the TV monitor and check that the lens is focused.
Processing after Completing Adjustments:
1)
1)
Select page: 5F, address: 3D, and set the data memorized at
step 2.
step 2.
2)
Select page: 7B, address: 98, and set the data memorized at
step 3.
step 3.
3)
Select page: 60, address: 2C, and set data: 00.
Click on the first or last page to see other DSC-P52 (serv.man4) service manuals if exist.