View Sony DSC-P41 / DSC-P43 Service Manual online
in the LEVEL 2 Service Manual.
When repairing, use this manual together with LEVEL 2 Service Manual.
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987674342.pdf).
• This service manual contains information for Japanese model as well.
CH-146 (CCD SIGNAL PROCESS) ······························ 4-9
SY-101 (1/8) (CAMERA MODULE) ··························· 4-11
SY-101 (2/8) (CAMERA DSP) ····································· 4-13
SY-101 (3/8) (LENS DRIVE) ······································· 4-15
SY-101 (4/8) (SH DSP) ················································· 4-17
SY-101 (5/8) (FRONT CONTROL) ······························ 4-19
SY-101 (6/8) (AUDIO) ·················································· 4-21
SY-101 (7/8) (DC/DC CONVERTER) ·························· 4-23
SY-101 (8/8) (CONNECTOR) ······································ 4-25
CH-146 ·········································································· 4-39
SY-101 ··········································································· 4-39
New parts must be attached after removal of chip.
Be careful not to heat the minus side of tantalum
capacitor, Because it is damaged by the heat.
indicate that they are not used.
In such cases, the unused circuits may be indicated.
curve B, unless otherwise noted.
measurement points and ground when camera shoots
color bar chart of pattern box. They are reference values
and reference waveforms.
(VOM of DC 10 M
impedance of VOM used.)
include the board name.
(In addition to this, the necessary note is printed in each block)
le numéro spécifie.
L = About 11 cm (PTB-1450)
number of CP900 on SY-101 board.
CL001 to CL074 on CH-146 board.
so that there PRINTED WIRING BOARD
and SCHEMATIC DIAGRAM are omitted.
HALL GAIN CONTROL