Read Sony DSC-P3 (serv.man2) Service Manual online
– 5 –
DSC-P3
SERVICE NOTE
•
NOTE FOR REPAIR
Make sure that the flat cable and flexible board are not cracked of
bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
When remove a connector, don’t pull at wire of connector.
It is possible that a wire is snapped.
It is possible that a wire is snapped.
When installing a connector, don’t press down at wire of connector.
It is possible that a wire is snapped.
It is possible that a wire is snapped.
• When repairing this device with the power on, if you remove
the SW-364 board or CABINET (FRONT) assembly, this de-
vice stops working.
In this case, you can work without the device stopping by fas-
tening the hook of the LENS COVER OPEN/CLOSE switch
(S201) on the SW-364 board with tape.
vice stops working.
In this case, you can work without the device stopping by fas-
tening the hook of the LENS COVER OPEN/CLOSE switch
(S201) on the SW-364 board with tape.
S201
Click on the first or last page to see other DSC-P3 (serv.man2) service manuals if exist.