Read Sony DSC-P10 / DSC-P12 (serv.man3) Service Manual online
SERVICE MANUAL
• INSTRUCTION MANUAL is shown at the end of this document.
LEVEL
1
Link
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
Link
DIGITAL STILL CAMERA
DSC-P10/P12
Photo: DSC-P10
US Model
Canadian Model
DSC-P10
AEP Model
UK Model
DSC-P10/P12
E Model
Hong Kong Model
Australian Model
Chinese Model
Korea Model
Tourist Model
Japanese Model
DSC-P10
Revision History
Revision History
Ver 1.2 2003. 12
— 2 —
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
DSC-P10/P12
SPECIFICATIONS
COVER
COVER
White balance
Flash, Automatic, Daylight, Cloudy,
Fluorescent, Incandescent
Fluorescent, Incandescent
Data format (DCF compliant)
Still images: Exif Ve r. 2.2 JPEG
compliant, GIF (for Clip Motion),
DPOF compatible
Audio with still image:
MPEG1 compliant (Monaural)
Moving images:
MPEG1 compliant (Monaural)
compliant, GIF (for Clip Motion),
DPOF compatible
Audio with still image:
MPEG1 compliant (Monaural)
Moving images:
MPEG1 compliant (Monaural)
Recording media
“Memory Stick”
Flash
Recommended distance (ISO set to Auto):
0.5 m to 3.5 m (19 3/4 inches to
11 feet 5 3/16 inches) (W)
0.6 m to 2.5 m (23 5/8 inches to 8 feet
2 7/16 inches) (T)
0.5 m to 3.5 m (19 3/4 inches to
11 feet 5 3/16 inches) (W)
0.6 m to 2.5 m (23 5/8 inches to 8 feet
2 7/16 inches) (T)
[Output connectors]
A/V OUT (MONO) (Monaural)
Minijack
Video: 1 Vp-p, 75
Video: 1 Vp-p, 75
Ω, unbalanced,
sync negative
Audio: 327 mV (at a 47 k
Ω load)
Output impedance 2.2 k
Ω
USB jack
mini-B
[General]
Used battery pack
NP-FC11
Power requirements
3.6 V
Power consumption (during shooting)
1.6 W
Operating temperature
0
°C to 40°C (32°F to 104°F)
Storage temperature
–20
°C to +60°C (– 4 °F to +140°F)
Dimensions
108
×51.5×35.1 mm
(4 3/8
×2 1/8×1 7/16 inches)
(W/H/D, excluding maximum
protrusions)
protrusions)
Mass
Approx. 200 g (7 oz) (including
battery pack NP-FC11, “Memory
Stick” and wrist strap)
battery pack NP-FC11, “Memory
Stick” and wrist strap)
Built-in microphone
Electret condenser microphone
Built-in speaker
Dynamic speaker
Exif Print
Compatible
PRINT image matching II
Compatible
Storage temperature
–20
°C to +60°C (– 4 °F to +140°F)
Dimensions
Approx. 48
×29×81 mm
(1 15/16
×1 3/16×3 1/4 inches)
(W/H/D)
Mass
Approx. 130 g (5 oz)
x
NP-FC11 battery pack
Used battery
Lithium-ion battery
Maximum voltage
DC 4.2 V
Nominal voltage
DC 3.6 V
Capacity
2.8 Wh (780 mAh)
Accessories
• NP-FC11 battery pack (DSC-P12: 2, DSC-P10: 1)
• AC-LS5 AC Adaptor
• AC-LS5 AC Adaptor
• Power cord (mains lead)
• A/V connecting cable
• USB cable
• Wrist strap
• “Memory Stick” (32 MB)
• CD-ROM (USB driver SPVD-010)
• CD-ROM (USB driver SPVD-010)
• Operating instructions
• Soft carrying case (DSC-P12 only)
Design and specifications are subject to change
without notice.
without notice.
x
Camera
[System]
Image device
9.04 mm (1/1.8 type) color CCD
Primary color filter
Primary color filter
Total pixels number of camera
Approx. 5 250 000 pixels
Effective pixels number of camera
Approx. 5 090 000 pixels
Lens
3
× zoom lens
f = 7.9 – 23.7 mm (5/16 –
15/16 inches) (38 – 114 mm
(1 1/2 – 4 1/2 inches) when converted
to a 35 mm still camera)
F2.8 – 5.2
15/16 inches) (38 – 114 mm
(1 1/2 – 4 1/2 inches) when converted
to a 35 mm still camera)
F2.8 – 5.2
Exposure control
Automatic exposure, Scene selection
(7 modes)
(7 modes)
[LCD screen]
Used LCD panel
3.8 cm (1.5 type) TFT drive
Total number of dots
123 200 (560
×220) dots
x
AC-LS5 AC Adaptor
Rated input voltage
100 to 240 V AC, 50/60 Hz, 11 W,
0.16 to 0.09 A
0.16 to 0.09 A
Rated output voltage
DC 4.2 V, 1.5 A in operating mode
Operating temperature
0
°C to 40°C (32°F to 104°F)
— 3 —
DSC-P10/P12
SELF-DIAGNOSIS FUNCTION
COVER
COVER
[Description on Self-diagnosis Display]
Self-diagnosis display
• C: ss: ss
You can reverse the camera
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
• E: ss: ss
Contact your Sony dealer or local
authorized Sony service facility.
authorized Sony service facility.
Display Code
C:32:ss
C:13:ss
Countermeasure
Turn the power off and on again.
Format the “Memory stick”.
Insert a new “Memory Stick”.
Cause
Trouble with hardware.
Unformatted memory stick is inserted.
Memory stick is broken.
Caution Display During Error
SYSTEM ERROR
FORMAT ERROR
MEMORY STICK ERROR
E:61:ss
E:91:ss
Checking of lens drive circuit.
When failed in the focus and zoom
initialization.
initialization.
Abnormality when flash is being
charged.
charged.
Checking of flash unit or replacement
of flash unit.
of flash unit.
—
1. MAIN PARTS
DSC-P10/P12
— 4 —
1. ORNAMENTAL PARTS
Note:
• Items marked “*” are not stocked since they are seldom required for routine service.
Some delay should be anticipated when ordering these items.
• The parts numbers of such as a cabinet are also appeared in this section.
Refer to the parts number mentioned below the name of parts to order.
• Abbreviation
AUS: Australian model
CH : Chinese model
CND: Canadian model
CH : Chinese model
CND: Canadian model
• No deep blue models are made as Us or Canadian models.
COVER
COVER
HK : Hong Kong model
JE
JE
: Tourist model
J
: Japanese model
KR : Korean model
Les composants identifiés par une
marque 0 sont critiquens pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
marque 0 sont critiquens pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
The components identified by
mark 0 or dotted line with mark
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Replace only with part number
specified.
LCD window adhesive sheet
3-081-761-01
3-081-761-01
LCD window
3-081-762-01
3-081-762-01
jack cover
3-081-742-31 (SILVER)
3-081-742-41 (DEEP BLUE)
(When change it, need dismantle the set.)
3-081-742-31 (SILVER)
3-081-742-41 (DEEP BLUE)
(When change it, need dismantle the set.)
