Read Sony DSC-P1 (serv.man3) Service Manual online
– 9 –
BT lid assembly
BT plate
Two claws
A
Note: After pulling off the BT lid assembly,
take care not to damage the aluminum cabinet
by the BT plate which will open by means of
a spring force.
by the BT plate which will open by means of
a spring force.
1
Cut off the two claws of the BT inner lid,
and pull off the BT lid assembly
in the direction of arrow
and pull off the BT lid assembly
in the direction of arrow
A
.
End face of BT plate
Two claws
B
2
Aligning with the rails of BT plate, slide
new BT lid assembly in the direction of arrow
new BT lid assembly in the direction of arrow
B
.
In such a case, slide until a click is heard, avoiding
a damage of two claws by the end face of BT plate.
a damage of two claws by the end face of BT plate.
Note: As tricks, slide the BT lid assembly obliquely
by the amount of a play to the BT plate as shown
in the figure, taking care not to damage the two claws.
in the figure, taking care not to damage the two claws.
BT plate end face
Claw
Click on the first or last page to see other DSC-P1 (serv.man3) service manuals if exist.