Read Sony DSC-P1 (serv.man3) Service Manual online
– 16 –
2-17. JACK COVER REPLACING METHOD
Parallel pin (dia. 1.6
×
5)
3
Pull off the forcibly fitted parallel pin (dia. 1.6
×
5)
in the direction of arrow
A
.
A
Adhesive sheet (A)
[Between inner cabinet (rear) assembly
and aluminum cabinet (rear) assembly]
[Between inner cabinet (rear) assembly
and aluminum cabinet (rear) assembly]
Light interception sheet (F)
1
Peel off the light interception sheet (F).
2
From the aluminum cabinet (rear) assembly, remove
the inner cabinet (rear) assembly stuck with
adhesive sheet (A) at two places.
the inner cabinet (rear) assembly stuck with
adhesive sheet (A) at two places.
Inner cabinet (rear) assembly
4
Pull the jack cover off the inner cabinet (rear).
Jack cover
Inner cabinet (rear) assembly
5
Insert new jack cover into the inner
cabinet (rear) assembly.
cabinet (rear) assembly.
Jack cover
Parallel pin (dia. 1.6
×
5)
6
Forcibly fit the Parallel pin (dia. 1.6
×
5).
Aluminum cabinet (rear) assembly
7
Insert the inner cabinet, aligning with the aluminum cabinet.
In such a case, if adhesive sheet (A) is not present or
an adhesive force is reduced, affix adhesive sheet (A)
(3-064-219-01) before insertion.
In such a case, if adhesive sheet (A) is not present or
an adhesive force is reduced, affix adhesive sheet (A)
(3-064-219-01) before insertion.
Light interception sheet (F)
8
As shown below, affix the light
interception sheet (F), aligning with
the positioning boss.
interception sheet (F), aligning with
the positioning boss.
Click on the first or last page to see other DSC-P1 (serv.man3) service manuals if exist.