DSC-P1 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 8

Read Sony DSC-P1 (serv.man2) Service Manual online

1-1
SECTION  1
GENERAL
DSC-P1
This section is extracted from
instruction manual.
2
To prevent fire or shock hazard, do 
not expose the unit to rain or 
moisture.
  
Never expose the battery pack to 
temperature above 140°F (60°C), such as in 
a car parked in the sun or under direct 
sunlight.
If you have any questions about this product, 
you may call: 
Sony Customer Information Center 
1-800-222-SONY (7669) 
The number below is for the FCC related 
matters only.
Regulatory Information 
CAUTION
You are cautioned that any changes or 
modifications not expressly approved in this 
manual could void your authority to operate 
this equipment.
Note: 
This equipment has been tested and found to 
comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide 
reasonable protection against harmful 
interference in a residential installation. This 
equipment generates, uses, and can radiate 
radio frequency energy and, if not installed 
and used in accordance with the 
instructions, may cause harmful interference 
to radio communications. However, there is 
no guarantee that interference will not occur 
in a particular installation. If this equipment 
does cause harmful interference to radio or 
television reception, which can be 
determined by turning the equipment off and 
on, the user is encouraged to try to correct 
the interference by one or more of the 
following measures: 
— Reorient or relocate the receiving 
antenna. 
— Increase the separation between the 
equipment and receiver. 
— Connect the equipment into an outlet 
on a circuit different from that to which 
the receiver is connected. 
— Consult the dealer or an experienced 
radio/TV technician for help. 
WARNING
For the Customers in the 
U.S.A.  
This symbol is intended to 
alert the user to the presence 
of uninsulated “dangerous 
voltage” within the 
product’s enclosure that 
may be of sufficient 
magnitude to constitute a 
risk of electric shock to 
persons. 
This symbol is intended to 
alert the user to the presence 
of important operating and 
maintenance (servicing) 
instructions in the literature 
accompanying the 
appliance. 
Declaration of Conformity 
Trade Name:
SONY 
Model No.:
DSC-P1 
Responsible Party:Sony Electronics Inc. 
Address:
1 Sony Drive, Park 
Ridge, NJ, 07656 USA 
Telephone No.:
201-930-6972 
This device complies with Part 15 of the 
FCC Rules. Operation is subject to the 
following two conditions: (1) This device 
may not cause harmful interference, and 
(2) this device must accept any interference 
received, including interference that may 
cause undesired operation. 
3
The supplied interface cable must be used 
with the equipment in order to comply with 
the limits for a digital device pursuant to 
Subpart B of Part 15 of FCC Rules. 
DISPOSAL OF LITHIUM ION 
BATTERY. 
LITHIUM ION BATTERY. 
DISPOSE OF PROPERLY. 
You can return your unwanted lithium ion 
batteries to your nearest Sony Service 
Center or Factory Service Center. 
Note: 
In some areas the disposal of lithium ion 
batteries in household or business trash may 
be prohibited. 
For the Sony Service Center nearest you call 
1-800-222-SONY (United States only) 
For the Sony Factory Service Center nearest 
you call 416-499-SONY (Canada only) 
Caution:
Do not handle damaged or leaking lithium 
ion battery.
 
CAUTION 
TO PREVENT ELECTRIC SHOCK, DO 
NOT USE THIS POLARIZED AC PLUG 
WITH AN EXTENSION CORD, 
RECEPTACLE OR OTHER OUTLET 
UNLESS THE BLADES CAN BE FULLY 
INSERTED TO PREVENT BLADE 
EXPOSURE. 
This product has been tested and found 
compliant with the limits sets out on the 
EMC Directive for using connection cables 
shorter than 3 meters.
The electromagnetic fields at the specific 
frequencies may influence the picture and 
sound of this camera.  
A moulded plug complying with BS 1363 is 
fitted to this equipment for your safety and 
convenience. 
Should the fuse in the plug supplied need to 
be replaced, a 5 AMP fuse approved by 
ASTA or BSI to BS 1362, (i.e. marked with 
 or 
 mark) must be used. 
If the plug supplied with this equipment has 
a detachable fuse cover, be sure to attach the 
fuse cover after you change the fuse. Never 
use the plug without the fuse cover. If you 
should lose the fuse cover, please contact 
your nearest Sony service station. 
Directive:EMC Directive 89/336/EEC.92/
31/EEC 
This equipment complies with the EMC 
regulations when used under the following 
circumstances: 
• Residential area 
• Business district 
• Light-industry district 
(This equipment complies with the EMC 
standard regulations EN55022 Class B.) 
  
For the Customers in CANADA 
This Class B digital apparatus complies with 
Canadian ICES-003. 
For the Customers in the U.S.A. 
This device complies with Part 15 of the 
FCC Rules. Operation is subject to the 
following two conditions: (1) This device 
may not cause harmful interference, and 
(2) this device must accept any interference 
received, including interference that may 
cause undesired operation.
For the Customers in the 
U.S.A. and Canada
Attention for the Customers in 
Europe
NOTICE FOR THE CUSTOMERS 
IN THE UNITED KINGDOM
For the Customers in 
Germany
“Memory Stick”
“Memory Stick” and Battery 
Pack
N50
4
 
For the Customers in the 
U.S.A. and Canada   
  
Trial recording
Before you record one-time events, you may 
want to make a trial recording to make sure 
that the camera is working correctly.
No compensation for contents of 
the recording
Contents of the recording cannot be 
compensated for if recording or playback is 
not possible due to a malfunction of your 
camera, etc.
Notes on image data compatibility 
• 
This camera conforms with the Design 
Rules for Camera File Systems universal 
standard established by the JEIDA (Japan 
Electronic Industries Development 
Association). You cannot play back on 
your camera still images recorded on other 
equipment (DCR-TRV890E/TRV900/
TRV900E, DSC-D700, DSC-D770) that 
does not conform with this universal 
standard. (These models are not sold in 
some areas.)
• Playback of images recorded with your 
camera on other equipment and playback 
of images recorded or edited with other 
equipment on your camera are not 
guaranteed.
Precaution on copyright 
Television programs, films, video tapes, and 
other materials may be copyrighted. 
Unauthorized recording of such materials 
may be contrary to the provision of the 
copyright laws. 
Do not shake or strike the camera 
In addition to malfunctions and inability to 
record images, this may render the 
“Memory Stick” unusable or image data 
breakdown, damage or loss may occur.
Do not aim the camera at the sun 
or other bright light
This may cause irrecoverable damage to 
your eyes.
LCD screen, finder (only models 
with a finder) and lens 
• 
The LCD screen and the finder are 
manufactured using extremely high-
precision technology so over 99.99% of 
the pixels are operational for effective use. 
However, there may be some tiny black 
points and/or bright points (white, red, 
blue or green in color) that constantly 
appear on the LCD screen and the finder. 
These points are normal in the 
manufacturing process and do not affect 
the recording in any way. 
• Be careful when placing the camera near a 
window or outdoors. Exposing the LCD 
screen, the finder or the lens to direct 
sunlight for long periods may cause 
malfunctions.
Do not get the camera wet
When taking pictures outdoors in the rain or 
under similar conditions, be careful not to 
get the camera wet. If moisture 
condensation occurs, refer to page 56 and 
follow the instructions on how to remove it 
before using the camera.
Back up recommendation 
To avoid the potential risk of data loss, 
always copy (back up) data to a disk.
Handling of the movable lens
This camera uses a movable lens.
Be careful not to strike or apply excessive 
force to the lens portion.
When the camera is used for long 
periods
Note that the camera body may become hot.
Battery pack
THIS CLASS B DIGITAL DEVICE 
COMPLIES WITH PART 15 OF THE 
FCC RULES AND THE CANADIAN 
ICES-003 OPERATION IS SUBJECT 
TO THE FOLLOWING TWO 
CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE 
HARMFUL INTERFERENCE, AND 
(2) THIS DEVICE MUST ACCEPT 
ANY INTERFERENCE RECEIVED, 
INCLUDING INTERFERENCE THAT 
MAY CAUSE UNDESIRED 
OPERATION.
Be sure to read the following 
before using your camera
6
Getting started
Identifying the parts
See the pages in parentheses for details of operation.
POWER switch/lamp
Shutter button (15) (21) 
MODE selector (32) 
Built-in microphone 
Do not touch while recording.
Flash (20)  
Photocell window for flash 
Do not block while recording.
Tripod receptacle (bottom 
surface) 
Use a tripod with a screw length of 
less than 9/32 inch (6.5 mm). You 
will be unable to firmly secure the 
camera to tripods having longer 
screws, and may damage the 
camera.
Finder window
Self-timer/
recording lamp (only during 
recording moving images)
Display window
Lens 
1
2
3
4
5
6
7
8
9
0
qa
Page of 105
Display

Click on the first or last page to see other DSC-P1 (serv.man2) service manuals if exist.