Read Sony DSC-N2 (serv.man4) Service Manual online
6-1
DSC-N2_ADJ
SECTION 6
ADJUSTMENTS
Before starting adjustments
Precaution on Replacing the SY-165 Board
• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not
required.
• Perform “VIDEO OUT Default Data Check” and “INITIAL LANGUAGE Default Data Check” mentioned below,
and also the adjustment items necessary after SY Board replacement.
VIDEO OUT Default Data Check
If the SY-165 board is replaced, the broadcast system data setting (NTSC/PAL) might be changed.
Check the default data of VIDEO OUT if destination code is right. If not, rewrite to the right value.
Check the default data of VIDEO OUT if destination code is right. If not, rewrite to the right value.
VIDEO OUT Default Data
Page
Address
Data
NTSC
PAL
4F
89
00
01
4F
A2
00
01
Writing Method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 89, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 4F, address: A2, and set data: 00 (NTSC) or data: 01 (PAL).
4) Select page: 40, address: 38, and set data: 00.
5) Click [Save] on the SEUS screen.
6) Select page: 80, address: 34, and check that the data is “00”.
7) Select page: 80, address: 30, and check that the data is “00”.
8) Select page: 00, address: 01, and set data: 00.
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 89, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 4F, address: A2, and set data: 00 (NTSC) or data: 01 (PAL).
4) Select page: 40, address: 38, and set data: 00.
5) Click [Save] on the SEUS screen.
6) Select page: 80, address: 34, and check that the data is “00”.
7) Select page: 80, address: 30, and check that the data is “00”.
8) Select page: 00, address: 01, and set data: 00.
Click on the first or last page to see other DSC-N2 (serv.man4) service manuals if exist.