DSC-N2 (serv.man2) - Sony Digital Camera Service Manual (repair manual)

dsc-n2 (serv.man2) service manual
Model
DSC-N2 (serv.man2)
Pages
59
Size
7.49 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 2
File
dsc-n2-sm2.pdf
Date

Read Sony DSC-N2 (serv.man2) Service Manual online

SERVICE MANUAL
LEVEL
 
2
Link
DISASSEMBLY
SERVICE NOTE
SPECIFICATIONS
SCHEMATIC DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
BLOCK DIAGRAMS
REPAIR PARTS LIST
PRINTED WIRING BOARDS
Link
Revision History
Revision History
Sony EMCS Co.
DSC-N2_L2
Internal memory
ON BOARD
Internal memory
ON BOARD
Revised-1
Replace the previously issued
SERVICE MANUAL 9-852-143-31
with this Manual.
Ver 1.2  2007.09
DIGITAL STILL CAMERA
2007I0200-1
  © 2007.9
Published by Kohda TEC
9-852-143-32
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Argentine Model
Brazilian Model
Japanese Model
Tourist Model
The components identified by
mark  0  or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
Les composants identifiés par une
marque  0  sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
• Precaution on Replacing the SY-165 Board
DSC-N2
— 2 —
DSC-N2_L2
SPECIFICATIONS
Camera
[System]
Image device: 
9.15 mm (1/1.7 type) color CCD, 
Primary color filter
Total pixel number of camera: 
Approx. 10 300 000 pixels
Effective pixel number of camera: 
Approx. 10 054 000 pixels
Lens:
 Carl Zeiss Vario-Tessar 3
× zoom lens 
f = 7.9 - 23. 7 mm (38 -  114 mm when 
converted to a 35 mm still camera) F2.8 -  5.4
Exposure control: Automatic exposure, Manual 
exposure, Scene Selection (8 modes)
White balance: 
Automatic, Daylight, Cloudy, 
Fluorescent, Incandescent, Flash
File format (DCF compliant): 
Still images: Exif Ver. 2.21 JPEG compliant, 
DPOF compatible
Movies: MPEG1 compliant (Monaural)
Recording media:  Internal Memory 
(approx. 25 MB), "Memory Stick Duo"
Flash: 
Recommended distance (ISO set to Auto): 
Approx. 0.2 to 4.8 m (7 7/8 inches to 
189 inches) (W)/approx. 0.34 to 2.5 m 
(13 1/2 inches to 98 1/2 inches) (T)
[Input and Output connectors]
Multi connector
USB communication: 
Hi-Speed USB (USB 2.0 compliant)
[LCD screen]
LCD panel: 
7.5 cm (3.0 type) TFT drive
Total number of dots:
 230 400 (960
×240) dots
[Power, general]
Power:
 Rechargeable battery pack NP-BG1, 3.6 V
AC-LS5K AC Adaptor (not supplied), 4.2 V
Power consumption (during shooting):
 1.3 W
Operating temperature: 
0 to 40
°C ( 32 to 104° F)
Storage temperature:
 -20 to +60
°C (-4 to +140°F)
Dimensions:
 96.7
×61.1×22.7 mm (3 7/8×2 1/2×
29/32 inches) (W/H/D, excluding protrusions)
Mass:
 Approx. 185 g (6.5 oz) (including NP-BG1 
battery pack and wrist strap, etc.)
Microphone:
Monaural
Speaker:
 Monaural
Exif Print:
Compatible
PRINT Image Matching III:
Compatible
Compatible
PictBridge:
BC-CSG/BC-CSGB battery charger
Power requirements:
AC 100 to 240 V, 50/60 Hz, 
2 W (BC-CSG)/ 2.6 W (BC-CSGB)
Output voltage: 
DC 4.2 V, 0.25 A
Operating temperature:
 0 to 40
°C ( 32 to 104°F)
Storage temperature: 
-20 to  +60
°C (-4 to  +140°F)
Dimensions:
 Approx. 62
×24×91 mm (2 1/2×
31/32
×3 5/8 inches) (W/H/D)
Mass:
 Approx. 75 g (2.7 oz)
Rechargeable battery pack 
NP-BG1
Used battery:
 Lithium-ion battery
Maximum voltage: DC 4.2 V
Nominal voltage:  DC 3.6 V
Capacity:
3.4 Wh (960 mAh)
Design and specifications are subject to change 
without notice.
— 3 —
DSC-N2_L2
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
FLEXIBLE Circuit Board Repairing
Keep the temperature of the soldering iron around 270
°
C
during repairing.
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
Unleaded solder melts at a temperature about 40
°
C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
— 4 —
DSC-N2_L2
TABLE OF CONTENTS
1.
SERVICE NOTE
1-1.
Description on Self-diagnosis Display ···························· 1-1
1-2.
Process After Fixing Flash Error ····································· 1-1
1-3.
Method for Copying or Erasing the Data in Internal
Memory ··········································································· 1-2
1-4.
Caution for Repairing ······················································ 1-3
1-5.
Precaution on Replacing the SY-165 Board ···················· 1-4
2.
DISASSEMBLY
2-1.
Disassembly ····································································· 2-2
2-2.
The Method of Attachment of Cabinet Center Block ······ 2-3
2-3.
Exchange Method of Barrier Assembly ·························· 2-4
2-4.
Exchange Method of LSV-1100A ··································· 2-7
3.
BLOCK DIAGRAMS
3-1.
Overall Block Diagram (1/2) ··········································· 3-1
3-2.
Overall Block Diagram (2/2) ··········································· 3-2
3-3.
Power Block Diagram ····················································· 3-3
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1.
Frame Schematic Diagram ·············································· 4-1
4-2.
Schematic Diagrams ························································ 4-2
4-3.
Printed Wiring Boards ··················································· 4-15
5.
REPAIR  PARTS  LIST
5-1.
Exploded Views ······························································· 5-2
5-2.
Electrical Parts List ························································· 5-7
Section
Title
Page
Section
Title
Page
Page of 59
Display

Download Sony DSC-N2 (serv.man2) Service Manual (Repair Manual)

Here you can read online and download Sony DSC-N2 (serv.man2) Service Manual in PDF. DSC-N2 (serv.man2) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DSC-N2 (serv.man2) Digital Camera. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.