Read Sony DSC-M2 (serv.man3) Service Manual online
6-5
DSC-M2_ADJ
Board
replacement
Adjusting item
Adjustment
LCD unit
Back light unit
(AF illumination LED)
(Timing gen., S/H, AGC, A/D conv.)
(Camera DSP)
(Video amp.)
(Internal memory) (Note 4)
LCD901
LED901
IC201 (RGB drive, Timing gen.) (LCD)
D009
IC151
IC301
IC302
IC901
(COMPLETE)
(COMPLETE) (Note 3, 4, 5)
Lens block
CCD block assy (Including FP-299 flexible board and CCD imager)
Flash unit (FL 80100)
LCD block
LCD block
PM -046 board
FP-304 flexible board
SY-133 board
SY-133 board
SY-133 board
SY-133 board
PM-046 board
SY-133 board
VIDEO adjustment
Video output level adj.
z
z
z
(Note 1)
Wide limit adj.
z
z
CAMERA adjustment 1
Flange back adj.
z
z
z
CAMERA adjustment 2
Flange back check
z
z
z
F No. compensation
Measure gain adj.
Mechanical shutter adj.
Light value adj.
(Note 2)
AWB 3200K-5800K standard data input
z
z
z
Color reproduction adj. & check
CCD linearity check
CCD white defect compensation check
CCD black defect compensation check
Strobe adj.
Auto focus illumination check
COM AC adj.
V-COM adj.
White Balance adj.
(Note 1)
Initialization of data
z
CAMERA adjustment 3
z
z
CAMERA adjustment 4
CAMERA adjustment 5
z
z
z
z
z
z
z
z
z
LCD adjustment
z
z
z
z
z
z
Block
replacement
Replaced parts
replacement
Mounted parts
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1: The automatic Adjustment Program does not support the “Initialization of data” and “Wide Limit Adjustment”. Perform them
Note 1: The automatic Adjustment Program does not support the “Initialization of data” and “Wide Limit Adjustment”. Perform them
manually.
Note 2: Use the AWB Adjustment Program (M2 AwbAdjustment.exe).
Note 3: When replacing the SY-133 board, erase the data in internal memory (album and music) of the board before replacement.
Note 4: When replacing the SY-133 board or the IC901 on the SY-133 board, execute formatting and initialize the internal memory
Note 3: When replacing the SY-133 board, erase the data in internal memory (album and music) of the board before replacement.
Note 4: When replacing the SY-133 board or the IC901 on the SY-133 board, execute formatting and initialize the internal memory
(album and music) after replacement.
Note 5: When replacing the SY-133 board, perform “VIDEO OUT Default Data Check” and “Initial Language Data Check” after re-
placement.
Table 6-1-1
Click on the first or last page to see other DSC-M2 (serv.man3) service manuals if exist.