Read Sony DSC-M1 (serv.man2) Service Manual online
5-4
5. REPAIR PARTS LIST
5. REPAIR PARTS LIST
DSC-M1
5-1-2. BATTERY HOLDER SECTION
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
51
1-479-041-11 SWITCH BLOCK, CONTROL (PW80000)
52
2-320-830-01 SHEET, RADIATION
53
A-1088-359-A SY-114 BOARD, COMPLETE (SERVICE)(J)
53
A-1104-976-A SY-114 BOARD, COMPLETE (SERVICE)
(EXCEPT J)
54
2-320-837-01 SHEET (SY), RADIATION
55
2-320-838-01 GUARD, BT TERMINAL
56
2-515-488-21 SCREW (M1.7), LOCK ACE, P2
57
X-2024-373-1 HOLDER ASSY, BT
58
A-1081-827-A FP-036 FLEXBLE BOARD
59
1-864-627-11 FP-039 FLEXIBLE BOARD
60
1-864-628-11 FP-040 FLEXIBLE BOARD
0 BT001
1-528-999-51 BATTERY, LITHIUM SECONDARY
BT901
1-780-061-11 BATTERY TERMINAL BOARD
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Note :
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Note :
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
BT901
X
Y
A
B
B
SY-114
57
55
59
52
58
56
51
56
56
60
54
54
52
53
52
BT001
BT001 (Lithium battery) FP-040 flexlbe board on the mount position (See page 4-51)
SY1
14
PW80000
Position of attaching "54"Be sure not to protrude it from the IC.
Position of attaching "52"
X direction: Align the edge of "52" with the bottom
of the IC as shown in the left figure.
Y direction: Align the edge of "52" with the left end of the coil.
Attach 52 in such a manner that the coil
(A) and (B) are covered with 52.
X direction: Align the edge of "52" with the bottom
of the IC as shown in the left figure.
Y direction: Align the edge of "52" with the left end of the coil.
Attach 52 in such a manner that the coil
(A) and (B) are covered with 52.
Note 2:
Note 2:
Note 1:
Note1:
Ver 1.1 2005. 04
Click on the first or last page to see other DSC-M1 (serv.man2) service manuals if exist.