DSC-L1 (serv.man4) - Sony Digital Camera Service Manual (repair manual). Page 25

6-23

DSC-L1

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD Adj.
2. Contrast Adj.
3. V-COM Adj.
4. Transmissive Mode White Balance Adj.
5. Reflective Mode White Balance Adj.
6. Release of Data Setting during LCD Adj.

[Adjusting method]
1) Click the 

[LCD Adjustment Start]

 button.

2) The Automatic Adjustment Program executes the items from

“1. Data Setting during LCD Adj.” to “2. Contrast Adj.”.

3) Upon successful completion of the “2. Contrast Adj.”, the fol-

lowing message is displayed during execution in “3. V-COM
Adj.”. On the SEUS screen, operate the UP/DOWN key so
that the brightness of portions A and B on the LCD panel is
equal. After the adjustment, click the 

[OK]

 button.

4) Upon completion of “3. V-COM Adj.”, “4. Transmissive Mode

White Balance Adj.” is executed. The following message is
displayed, and then check that LCD screen is not colored.
If colored, change the data of page: 8F, address: 28 and 2A on
the SEUS Operation screen to adjust so that the LCD screen is
not colored.

5) If the 

[OK]

 button is clicked, “5. Reflective Mode White Bal-

ance Adj.” and “6. Release of Data Setting during LCD Adj.”
will be executed.

6) Upon successful completion of all items the LCD adjustment,

the following message is displayed. Click the [OK] button

UP/DOWN key

A

A

A

A

B

B

B

B