Read Sony DSC-HX200 / DSC-HX200V (serv.man2) Service Manual online
DSC-HX200/HX200V_L2
3-1
3. ASSEMBLY
Assembly-1: Installation Cautions of
the Mask (NY213B).
Mask (NY213B)
Cutout
Cutout
Assembly-2: Installation Cautions of
the RL-110 Flexible Board.
Cushion (AF)
Control Switch Block
(SW63370)
(SW63370)
RL-110 Flexible Board
Fold the flexible board as shown in figure,
and install it with the cushion (AF).
and install it with the cushion (AF).
Assembly-3: The Method of installation of
the ST section.
Close the flash.
1
Install the Flash Unit and the ST Cover.
2
Install the PL Holder and the PL-056 Flexible Board.
ST Cover
ST Base Assy
Claws
Claw
Flash Unit
Flash harness
Be careful not to clip
harnesses in the BT base
assy and the BT cover.
harnesses in the BT base
assy and the BT cover.
Claws
Pins
Holes of
the Plunger Solenoid
the Plunger Solenoid
Open the flash.
3
Install the pin to the hole of the Plunger Solenoid.
And install one screw.
Holes of
the Plunger Solenoid
the Plunger Solenoid
Assembly-4: Route the Flash Harnesses.
Orange Harness
Open the flash.
Click on the first or last page to see other DSC-HX200 / DSC-HX200V (serv.man2) service manuals if exist.