Read Sony DSC-HX20 / DSC-HX20V / DSC-HX30 / DSC-HX30V (serv.man2) Service Manual online
DSC-HX20/HX20V/HX30/HX30V_L2
1-3
– ENGLISH –
1-3. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the HOME screen. (When erasing the data, execute formatting the internal memory.)
Note 1:When replacing the SY-325 board, erase the data in internal memory of the board before replacement.
Note 2:When replacing the SY-325 board, execute formatting and initialize the internal memory after replacement.
Note 2:When replacing the SY-325 board, execute formatting and initialize the internal memory after replacement.
Method for Copying the Data in Internal Memory
Copy
Copies all images in the internal memory to a memory card.
1. Insert a memory card with sufficient free capacity into the camera.
2. MENU
(Settings)
(Memory
Card
Tool)
[Copy]
[OK]
Notes
Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little
remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.
Images cannot be copied individually.
Images cannot be copied individually.
The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the memory card after copying, then format the internal memory ([Format] in
internal memory, remove the memory card after copying, then format the internal memory ([Format] in
[Internal Memory Tool]).
The data will be copied to the recording folder that is currently being used, with a number one higher
than the largest data number in that folder.
than the largest data number in that folder.
Method for Formatting the Internal Memory or “Memory Stick Duo” media
Format
Formats the memory card or the internal memory.
When you use a memory card with this camera for the first time, it is recommended to format the card using
When you use a memory card with this camera for the first time, it is recommended to format the card using
the camera for stable performance of the memory card before shooting. Note that formatting permanently
erases all data on the memory card, and is unrecoverable. Save precious data on a computer, etc.
erases all data on the memory card, and is unrecoverable. Save precious data on a computer, etc.
1. MENU
(Settings)
(Memory Card Tool) or
(Internal Memory Tool)
[Format]
[OK]
Note
Note that formatting permanently erases all data including even protected images.
1-4. HOW TO WRITE DATA TO INTERNAL MEMORY
Usually, the camera has been set so as to disable the data writing from the PC to the internal memory of the camera.
This setting must be changed temporarily when the data is to be written to the internal memory such as a case after the board replacement.
To change settings is enabled with using the writing enabler tool (Write Enable Tool) on the Adjust Manual is activating from the Adjust Station.
This setting must be changed temporarily when the data is to be written to the internal memory such as a case after the board replacement.
To change settings is enabled with using the writing enabler tool (Write Enable Tool) on the Adjust Manual is activating from the Adjust Station.
Data writing method
1) Start the Adjust Manual from the Adjust Station.
2) Click
(Write Enable Tool) button.
3) Click “Activate Write Enable Mode” button.
4) Upon completion of the setting change, the following message will be displayed.
5) Return the driver to the original one, and connect the PC to the camera (USB mode: Mass Storage).
6) Write the data read out into the PC to the internal memory of the camera.
7) Disconnect the PC from the camera, and turn off the camera.
6) Write the data read out into the PC to the internal memory of the camera.
7) Disconnect the PC from the camera, and turn off the camera.
Note: By turning off the camera, the write enable setting is reset.
Click on the first or last page to see other DSC-HX20 / DSC-HX20V / DSC-HX30 / DSC-HX30V (serv.man2) service manuals if exist.