Read Sony DSC-HX1 (serv.man3) Service Manual online
Revision History
Revision History
Sony EMCS Co.
Auto-ADJ
DSC-HX1_ADJ
Ver. 1.0 2009.03
9-852-686-51
2009C0800-1
© 2009.03
Published by Kohda TEC
(ENGLISH)
For adjusting these models, the Adjust manual and the Adjust station are required.
For details of installing the Adjust station and the Adjust manual, please refer to the Service manual ADJ of DCR-
SR77E/SR87/SR87E.
For details of installing the Adjust station and the Adjust manual, please refer to the Service manual ADJ of DCR-
SR77E/SR87/SR87E.
Adjust station
It is the software to start Adjust manual for the specified product.
Adjust manual
It is the software to adjust and check digital cameras and camcorders for service. The executable file (.exe) for each
product is available.
For the operating procedure of the Adjust manual, after starting the Adjust manual software, please refer to “About
the Adjust manual software” on the ‘NOTE’ tab.
product is available.
For the operating procedure of the Adjust manual, after starting the Adjust manual software, please refer to “About
the Adjust manual software” on the ‘NOTE’ tab.
Note: In case of updating the Adjust manual or the Adjust station program, install with overwriting it.
Adjust manual Installation
Note 1:
Be sure to install Adjust station first.
Note 2:
Do not change the initially set folder to which the program is forwarded to.
1.
Download the Adjust manual (DSC-HX1 Series AM Ver_
□.□r□□.zip) from ESI home page.
2.
Double-click setup.exe.
3.
The installation window appears.
Click [Next]. Adjust manual installation starts.
Click [Next]. Adjust manual installation starts.
4.
The widow to choose the destination folder of the Adjust manual program appears.
Click [Next].
Click [Next].
5.
When Adjust manual is installed normally, the confirmation window appears.
Click [Finish]. The installer is closed.
Click [Finish]. The installer is closed.
DSC-HX1
— 2 —
DSC-HX1_ADJ
(JAPANESE)
これらの機種で調整を行なうには,アジャストマニュアルとアジャストステーションが必要です。
アジャストマニュアルとアジャストステーションのインストール方法詳細は,DCR-SR77E/SR87/SR87EのADJ編
を参照してください。
アジャストマニュアルとアジャストステーションのインストール方法詳細は,DCR-SR77E/SR87/SR87EのADJ編
を参照してください。
アジャストステーションとは
機種別のアジャストマニュアルを起動するためのソフトウェアです。
アジャストマニュアルとは
デジタルカメラ及びカムコーダのサービス用の調整ソフトウェアで,調整及び各種動作確認を行うことが可能です。
機種別に実行ファイル (.exe) が存在します。
アジャストマニュアルの操作方法については,アジャストマニュアル起動後に, NOTE タブにある “About the
Adjust manual software” を参照してください。
機種別に実行ファイル (.exe) が存在します。
アジャストマニュアルの操作方法については,アジャストマニュアル起動後に, NOTE タブにある “About the
Adjust manual software” を参照してください。
注意: アジャストステーション及びアジャストマニュアルのプログラムを更新する場合は,上書きインストール
を行なってください。
アジャストマニュアルインストール手順
注意1:インストールは必ず Adjust station を先に行なってください。
注意2:転送先フォルダは初期設定より変更しないでください。
注意2:転送先フォルダは初期設定より変更しないでください。
1.
ESIホームページより,Adjust manual (DSC-HX1 Series AM Ver_□.□r□□.zip) をダウンロードします。
2.
setup.exeをダブルクリックします。
3.
インストーラー画面が表示されます。
[Next] ボタンをクリックしてください。アジャストマニュアルのインストールを開始します。
[Next] ボタンをクリックしてください。アジャストマニュアルのインストールを開始します。
4.
転送先フォルダを選択する画面が表示されます。
[Next] ボタンをクリックしてください。
[Next] ボタンをクリックしてください。
5.
インストールが完了すると,画面が表示されます。
[Finish] ボタンをクリックしてください。インストールが終了します。
[Finish] ボタンをクリックしてください。インストールが終了します。
Revision History
Reverse
DSC-HX1_ADJ
Ver.
1.0
Date
2009.03
History
Official Release
Contents
—
S.M. Rev.
issued
—
985268651.pdf