DSC-H5 (serv.man3) - Sony Digital Camera Service Manual (repair manual)

Model
DSC-H5 (serv.man3)
Pages
36
Size
714.63 KB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / SECTION 6 ADJUSTMENTS
File
dsc-h5-sm3.pdf
Date

View Sony DSC-H5 (serv.man3) Service Manual online

SECTION 6
ADJUSTMENTS
Revision History
Revision History
Link
Link
List of service tools
Adjusting items when replacing main parts and boards
Before starting adjustments
LCD SYSTEM ADJUSTMENTS
ERROR
VIDEO SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
ADJUSTMENT PROGRAMS
INITIALIZATION OF DATA
PREPARATIONS BEFORE ADJUSTMENTS
CAMERA SECTION ADJUSTMENTS
SERVICE MODE
SERVICE MODE
Sony EMCS Co.
Auto-ADJ
DSC-H5_ADJ
DSC-H5
9-852-117-51
2007H0500-1
© 2007.8
Published by Kohda TEC
• Use this Service Manual together with the Automatic Adjustment Program (DSC-H5 Auto-Adj Ver_1.2r03.exe)
and the AWB Adjustment Program (H5AwbAdjustment.exe).
• Precaution on Replacing the SY-150 Board
Ver. 1.2  2007.08
— 2 —
DSC-H5_ADJ
TABLE OF CONTENTS
Section
Title
Page
6.
ADJUSTMENTS
Before Starting Adjustment ······················································· 6-1
1-1.
Adjusting Items When Replacing
Main Parts and Boards ···················································· 6-4
1-2.
List of Service Tools ························································ 6-5
6-1.
Camera Section Adjustments ··········································· 6-6
1-1.
Preparations Before Adjustments ···································· 6-6
1-2.
Adjustment Programs ···················································· 6-10
1-3.
Video System Adjustments ············································ 6-12
1-4.
Camera System Adjustments ········································· 6-14
1-5.
LCD System Adjustments ············································· 6-25
1-6.
Error ··············································································· 6-27
1-7.
Initialization of Data ······················································ 6-29
6-2.
Service Mode ································································· 6-30
6-1
DSC-H5_ADJ
SECTION  6
ADJUSTMENTS
Before starting adjustment
Precaution on Replacing the SY-150 Board
• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not
required.
• Perform “VIDEO OUT Default Data Check” and “Initial Language Data Check” mentioned below, and also the
adjustment items necessary after SY Board replacement.
VIDEO OUT Default Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setteing
because of broadcast system (NTSC/PAL).
When the data has changed because of board replaceing etc., check the default data of VIDEO OUT if destination code
is right. If not, rewrite to the right value.
VIDEO OUT Default Data
Page
Address
Data
NTSC
PAL
4F
8D
00
01
Writing Method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 40, address: 38, and set data: 00.
4) Click [Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
6-2
DSC-H5_ADJ
Initial Language Data Check
If the SY-150 board was replaced, initial language setting may be changed. Accordingly, change the following data so
as to set same initial language as that of the set distributing in each region.
Initial language: Language displayed at the next starting if the setting of Setup menu was reset.
It is different from the language setting selectable with the menu.
Initial Language Data
Page
Address
Data
Language
GP1
GP2
GP3
GP4
4F
8C
00
English
z
z
z
01
Japanese
z
04
Spanish
z
z
06
Portugal
z
08
Simplified Chinese
z
0B
Russian
z
0D
Korean
z
Note: GP1 is fixed to Japanese.
GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.
Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8C, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click [Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute “Initialize” of Setup screen.
10) Check the language displayed when the camera starts.

Download Sony DSC-H5 (serv.man3) Service Manual (Repair Manual)

Here you can view online and download Sony DSC-H5 (serv.man3) Service Manual in PDF. DSC-H5 (serv.man3) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DSC-H5 (serv.man3) Digital Camera. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.