DSC-H5 (serv.man11) - Sony Digital Camera Service Manual (repair manual). Page 4

1-1E

DSC-H5_L3

The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)

When replacing the SY-150 board, erase the data in internal memory of the board before replacement.

When replacing the SY-150 board or the IC202 on the SY-150 board, execute formatting and initialize the internal memory after 
replacement.

When “FLASH error”  (Self-diagnosis Code  E : 91 : ** ) occurs, to prevent any abnormal situation caused by high voltage, setting of the
flash is changed automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. Flash error code can be initialized by the operations on the Setup screen.

Initializes the setting to the default setting.

1

Select [OK] with v on the control button, then press z.
The message “Initialize all settings Ready?” appears.

2

Select [OK] with v, then press z.
The settings are reset to the default setting.

Make sure that the power is not disconnected during resetting.

OK

See the following procedure.

Cancel

Cancels the resetting.

This item does not appear when a “Memory Stick Duo” is inserted in the camera.
The default settings are marked with 

.

Formats the internal memory.

• Note that formatting irrevocably erases all data in the internal memory, including even protected images.

1

Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be erased Ready?” appears.

2

Select [OK] with v, then press z.
The format is complete.

OK

See the following procedure.

Cancel

Cancels the formatting.

Copies all images in the internal memory to a “Memory Stick Duo”.

1

Insert a “Memory Stick Duo” having 32 MB or larger capacity.

2

Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be copied Ready?” appears.

3

Select [OK] with v, then press z.
Copying starts. 

• Use a fully charged Nickel-Metal Hydride battery or the AC Adaptor (not supplied). If you attempt to 

copy image files using a batteries with little remaining charge, the batteries may run out, causing copying 
to fail or possibly corrupting the data.

• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the 

internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in 

 (Internal Memory Tool).

• You cannot select a folder copied on a “Memory Stick Duo”.
• Even if you copy data, a 

 (Print order) mark is not copied.

OK

See the following procedure.

Cancel

Cancels the copying.