Read Sony DSC-H400 Service Manual online
DSC-H400
4-5
4-3. CAMERA SECTION ADJUSTMENTS
4-3-1. Writing Lens data
Introduction:
- Please handle lens with care.
- Perform the operation additionally when replacing Main board or Lens.
- Read and record the lens data on the Lens data code Label attached to the lens. (Fig. 4-3-1)
- Record of numbers. (25 digit)
- Please handle lens with care.
- Perform the operation additionally when replacing Main board or Lens.
- Read and record the lens data on the Lens data code Label attached to the lens. (Fig. 4-3-1)
- Record of numbers. (25 digit)
22003178026
52252200000049
Lens data
Fig.
4-3-1
Preparations:
Put the folder “Wrirte_Lens Data” downloaded in “4-1-5. Setting the Adjustment Mode” (Page 4-3) on any place of the PC.
Confirm that includes the following items.
• Write_LensCode_v[][][].exe
• UI43Api.dll
• Write_LensCode_v[][][].exe
• UI43Api.dll
The USB Driver is same as “4-3-12. Set Language Destination”. (Page 4-17)
Procedure:
1) Set the mode dial to P (Program Auto).
2) Check that the camera is on the adjustment mode.
1) Set the mode dial to P (Program Auto).
2) Check that the camera is on the adjustment mode.
Connect the camera and the PC.
3) Double click the “Write_LensCode_v[][][].exe” to start up the writing tool. (Fig. 4-3-2)
Fig.
4-3-2
4) Enter the recorded lens data in the “Data Code” text field.
Fig.
4-3-3
5) Click the “Write” button.
6) The message “Write Code To Camera OK !!” will be displayed.
6) The message “Write Code To Camera OK !!” will be displayed.
Click on the first or last page to see other DSC-H400 service manuals if exist.