DSC-H3 (serv.man4) - Sony Digital Camera Service Manual (repair manual)

Model
DSC-H3 (serv.man4)
Pages
41
Size
884.94 KB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / SERVICE 6 ADJUSTMENTS
File
dsc-h3-sm4.pdf
Date

View Sony DSC-H3 (serv.man4) Service Manual online

SECTION 6
ADJUSTMENTS
Revision History
Revision History
Sony EMCS Co.
Auto-ADJ
Ver. 1.3  2008.01
9-852-211-54
2008A0500-1
© 2008.1
Published by Kohda TEC
DSC-H3_ADJ
Link
Link
DSC-H3
List of service tools
Adjusting items when replacing main parts and boards
Before starting adjustments
VIDEO SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
DESTINATION DATA WRITE
USB SERIAL No. INPUT
ADJUSTMENT PROGRAM
LCD SYSTEM ADJUSTMENTS
ERROR
PREPARATIONS BEFORE ADJUSTMENTS
CAMERA SECTION ADJUSTMENTS
APPLICATION FOR ADJUSTMENT (SeusEX)
SERVICE MODE
DATA BACKUP
SERVICE MODE
• Use this Service Manual together with the Automatic Adjustment Program (DSC-H3 Auto-Adj Ver_1.3r04.exe).
6-1
DSC-H3_ADJ
Method for Copying or Erasing the Data in Internal Memory
(Internal Memory/Music)
The data can be copied/erased by the operations on the HOME screen. (When erasing the data, execute formatting the
internal memory.)
Note: When replacing the SY-185 board, erase the data in internal memory of the board before replacement.
Method for copying the data in internal memory
SECTION  6
ADJUSTMENTS
Before starting adjustments
Copies all images in the internal memory to a “Memory Stick Duo”.
1 Insert a “Memory Stick Duo” having sufficient free capacity.
2 Select [Copy] with v/V/b/B on the control button, then press z.
The message “All data in internal memory will be copied” appears.
3 Select [OK] with v, then press z.
Copying starts. 
To cancel copying
Select [Cancel] in step 
3, then press z.
• Use  a  fully charged battery pack. If you attempt to copy image files using a battery pack with little 
remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.
• You cannot select images to copy.
• The original images in the internal memory are retained even after copying. To delete the contents of the 
internal memory, remove the “Memory Stick Duo” after copying, then format the internal memory 
([Format] in [Internal Memory Tool]) .
• A new folder is created on the “Memory Stick Duo” and all the data will be copied to it. You cannot 
choose a specific folder and copy images to it.
• The   
(Print order) marks on the images are not copied.
Copy
Method for formatting the internal memory
This item does not appear when a “Memory Stick Duo” is inserted in the camera.
Formats the internal memory.
• Note that formatting permanently erases all data in the internal memory, including even protected images.
1 Select [Format] with v/V/b/B on the control button, then press z.
The message “All data in internal memory will be erased” appears.
2 Select [OK] with v, then press z.
Formatting starts.
To cancel formatting
Select [Cancel] in step 
2, then press z.
Format
6-2
DSC-H3_ADJ
How to Write Data to Internal Memory
Usually, the camera has been set so as to disable the data writing from the PC to the internal memory of the camera.
This setting must be changed temporarily when the data is to be written to the internal memory such as a case after the
board replacement.
To change the setting, use the write enable tool “WriteEnableTool.exe”.
Data writing method
1) Connect the PC to the camera (USB mode: Mass Storage), and switch the driver to the “Sony Seus USB Driver”.
2) Start the Write Enable Tool and the SeusEX.
3) Click the [Activate Write Enable Mode] button of the Write Enable Tool.
4) Upon completion of the setting change, the following message will be displayed.
5) Return the driver to the original one, and connect the PC to the camera (USB mode: Mass Storage).
6) Write the data read out into the PC to the internal memory of the camera.
7) Disconnect the PC from the camera, and turn off the camera.
Note: By turning off the camera, the write enable setting is reset.
6-3
DSC-H3_ADJ
Replaced parts
Block
Mounted parts
Board
replacement
replacement
replacement
Adjusting item
Adjustment
LCD901 LCD unit
D003 (AF illumination LED)
IC301 (Timing gen., CCD signal process)
IC602 (Audio, Video amp.)
SE501 (PITCH, YAW sensor)
(COMPLETE)
(COMPLETE) (Note)
Lens block
CCD block assy (Including CD-708 flexible board and CCD imager)
Flash unit
LCD block
PL-048 board
SY-185 board
SY-185 board
SY-185 board
ST-176 board
SY-185 board
Destination Data Write
Destination data write
z
USB Serial No. Input
USB serial No. input
z
Composite video level adj.
z
z
Component out Y level adj.
Component out Pb level adj.
Component out Pr level adj.
CAMERA adjustment 1
Hall adj.
z
z
CAMERA adjustment 2
Wide limit adj.
z
z
CAMERA adjustment 3
Flange back adj.
z
z
z
CAMERA adjustment 4
Flange back check
z
z
z
F No. compensation
Measure gain, LV adj.
Mechanical shutter adj.
AWB 3200K-5800K standard data input
AWB 3200K-5800K check
Color reproduction adj. & check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 6
Strobe adj.
z
z
z
z
z
CAMERA adjustment 7
Auto focus illumination check
z
z
CAMERA adjustment 8
Angular velocity sensor sensitivity adj.
z
z
z
V-COM adj.
White Balance adj.
z
LCD adjustment
z
CAMERA adjustment 5
z
z
z
z
VIDEO adjustment
z
z
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z  in the following table.
Note: When replacing the SY-185 board, erase the data in internal memory of the board before replacement.
Table 6-1-1

Download Sony DSC-H3 (serv.man4) Service Manual (Repair Manual)

Here you can view online and download Sony DSC-H3 (serv.man4) Service Manual in PDF. DSC-H3 (serv.man4) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DSC-H3 (serv.man4) Digital Camera. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.