DSC-H2 (serv.man3) - Sony Digital Camera Service Manual (repair manual)

dsc-h2 (serv.man3) service manual
Model
DSC-H2 (serv.man3)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
242.32 KB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 1
File
dsc-h2-sm3.pdf
Date

Read Sony DSC-H2 (serv.man3) Service Manual online

SERVICE MANUAL
Revision History
Revision History
Ver. 1.1  2006. 10
LEVEL
 
1
Link
SELF-DIAGNOSIS FUNCTION
ACCESSORIES
INSTRUCTION MANUAL
SPECIFICATIONS
SELF-DIAGNOSIS FUNCTION
ACCESSORIES
INSTRUCTION MANUAL
SPECIFICATIONS
Link
Sony EMCS Co.
DIGITAL STILL CAMERA
DSC-H2
2006J1600-1
  ©2006.10
Published by Kohda TEC
9-876-937-41
DSC-H2_L1
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Chinese Model
Argentina Model
Hong Kong Model
Korea Model
Tourist Model
Note :
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Note :
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
— 2 —
DSC-H2_L1
SPECIFICATIONS
These specifications are extracted from instruction
manual of DSC-H2 (2-673-166-11).
Camera
[System]
Image device
7.18 mm (1/2.5 type) color 
CCD, Primary color filter
Total pixel number of camera
Approx. 6 183 000 pixels
Effective pixel number of camera
Approx. 6 003 000 pixels
Lens
Carl Zeiss Vario-Tessar
12
×
 zoom lens
f = 6.0 – 72.0 mm (36 – 
432 mm when converted to a 
35 mm still camera)
F2.8 – 3.7
Exposure control Automatic exposure, Shutter 
speed priority, Aperture 
priority, Manual exposure, 
Scene Selection (7 modes)
White balance
Automatic, Daylight, Cloudy, 
Fluorescent, Incandescent, 
Flash, One push
File format (DCF compliant)
Still images: Exif Ver. 2.21
JPEG compliant, DPOF 
compatible
Movies: MPEG1 compliant 
(Monaural)
Recording media Internal Memory (30 MB)
“Memory Stick Duo”
Flash
Recommended distance (ISO 
set to Auto): approx. 0.3 m to 
9.0 m (11 7/8 inches to 29 feet 
6 3/8 inches) (W)/approx. 
0.9 m to 6.8 m (35 1/2 inches to 
22 feet 3 3/4 inches) (T)
Viewfinder
Electric viewfinder (color)
[Input and Output connectors]
A/V OUT jack (Monaural)
Minijack
Video: 1 Vp-p, 75 
,
unbalanced, sync negative
Audio: 327 mV (at a 47 k
 
load)
Output impedance 2.2 k
USB jack
mini-B
USB communication
Hi-Speed USB (USB 2.0 
compliant)
[LCD screen]
LCD panel
5.1 cm (2.0 type) TFT drive
Total number of dots
84 960 (35424 0) dots
[Finder]
Panel
0.5 cm (0.2 type) color
Total number of dots
Approx. 200 000 dots 
equivalent
[Power, general]
Power
HR 15/51:HR6 (size AA) 
Nickel-Metal Hydride batteries 
(2), 2.4 V
R6 (size AA) alkaline batteries 
(2), 3 V
ZR6 (size AA) Oxy Nickel 
Primary Battery (2), 3 V
AC-LS5K AC Adaptor 4.2 V
Power consumption (during shooting with the 
LCD screen)
1.1 W
Operating temperature
0 to 40
°
C (32 to 104
°
F)
Storage temperature
–20 to +60
°
C (–4 to +140
°
F)
Dimensions
113.28 3.094.0  mm
(4 1/2 inches
×
3 3/8 inches
×
3 3/4 inches) (W/H/D, 
excluding protrusions)
Mass
Approx. 537 g (1 lb 2.9 oz) 
(including two batterries, 
shoulder strap, adaptor ring, 
lens hood, lens cap, etc.)
Microphone
Electret condenser microphone
Speaker
Dynamic speaker
Exif Print
Compatible
PRINT Image Matching III
Compatible
PictBridge
Compatible
BC-CS2A/CS2B Ni-MH battery charger
Power requirements
AC 100 to 240 V, 50/60 Hz, 
3 W
Output voltage
AA: DC 1.4V 400 mA 
×
2
AAA: DC 1.4 V 160 mA 
×
 2
 Operating temperature
0 to +40
°
C (+32 to +104
°
F)
Storage temperature
–20 to +60
°
C (–4 to +140
°
F)
Dimensions
Approx. 713091
 mm
(2 7/8
×
1 3/16
×
3 5/8 inches) 
(W/H/D)
Mass
Approx. 90 g (3 oz)
Design and specifications are subject to change 
without notice.
— 3 —
DSC-H2_L1
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
— 4 —
DSC-H2_L1
SELF-DIAGNOSIS FUNCTION
Display Code
C:32:01
C:13:01
Countermeasure
Turn off the main power then back on.
Replace the memory stick.
Format the memory stick with the DSC-H2.
Cause
Trouble with hardware.
• The type of memory stick that cannot be
used by this machine, is inserted.
• Data is damaged.
• Unformatted memory stick is inserted.
Caution Display During Error
SYSTEM ERROR
MS ERROR
Self-diagnosis display
• C: ss: ss
The contents which can be handled
by customer, are displayed.
• E: ss: ss
The contents which can be handled
by engineer, are displayed.
DESCRIPTION ON SELF-DIAGNOSIS DISPLAY
METHOD FOR COPYING THE DATA IN INTERNAL MEMORY
Copies all images in the internal memory to a “Memory Stick”.
1
Insert a “Memory Stick” having 32 MB or larger capacity.
2
Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be copied Ready?” appears.
3
Select [OK] with v , then press z.
Copying starts. 
Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files 
using batteries with little remaining capacity, the batteries may run out, causing copying to fail or possibly 
corrupting the data.
You cannot copy individual images.
The original images in the internal memory are retained even after copying. To delete the contents of the 
internal memory, remove the “Memory Stick” after copying, then execute the [Format] command in 
 
Internal Memory Tool.
You cannot select a folder copied on a “Memory Stick”.
The setting of 
 (Print order) marks is not copied even when you copy data.
Copy
OK
See the following procedure.
Cancel
Cancels the copying.
Copying
102_COPY
Page of 5

Download Sony DSC-H2 (serv.man3) Service Manual (Repair Manual)

Here you can read online and download Sony DSC-H2 (serv.man3) Service Manual in PDF. DSC-H2 (serv.man3) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DSC-H2 (serv.man3) Digital Camera. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.