Read Sony DSC-G3 (serv.man3) Service Manual online
6-1
DSC-G3_ADJ
Before starting adjustments
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
When replacing the CN-396 board, erase the data in internal memory of the board before replacement.
Note 2:
If the CN-396 board or IC101 was replaced, format the internal memory. After the completion of format, write data to the PMB-
Portable.
Portable.
Note 3:
When replacing the SY-211 board, reset the customer’s network setting data prior to the replacement of the board.
Table 6-1-1
SECTION 6
ADJUSTMENTS
LCD block
ST-204 flexible board
SY-211 board
SY-211 board
SY-211 board
SY-211 board
CN-396 board
Destination Data Write
Destination data write
z
z
USB Serial No. Input
USB serial No. input
z
Network Setting Reset
Network Setting Reset
z
Internal Memory Format
Internal Memory Format
z
z
Composite video level
adjustment
adjustment
Composite video level adj.
z
z
Component out Y level adj.
Component out Pb level adj.
Component out Pr level adj.
Hall adj.
Auto orientation adj.
CAMERA adjustment 2
Wide limit adj.
z
z
CAMERA adjustment 3
Flange back adj.
z
z
z
CAMERA adjustment 4
Flange back check
z
z
z
F No. compensation
Measure gain, LV adj.
Mechanical shutter adj.
AWB 3200K-5800K standard data input
AWB 3200K-5800K check
Color reproduction adj. & check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 7
Strobe adj.
z
z
z
z
z
CAMERA adjustment 8
Auto focus illumination check
z
z
z
CAMERA adjustment 9
Angular velocity sensor sensitivity adj.
z
z
z
LCD adjustment
White Balance adj.
z
z
Touch panel adjustment
Touch panel adj.
z
z
Block
replacement
z
z
z
z
z
z
CAMERA adjustment 1
Component video level
adjustment
adjustment
z
CAMERA adjustment 6
z
Adjusting item
Adjustment
Lens block
CCD block assy (Including CD-747 flexible board and CCD imager)
Flash unit
z
CAMERA adjustment 5
IC601 (Audio, Video amp.)
IC304 (CCD signal process, Timing gen.)
D004 (AF illumination LED)
z
z
CP901 (Wireless LAN module)
Mounted parts
replacement
Replaced parts
Board
replacement
LCD901 (LCD, Touch panel unit)
ST-204 flexible board (COMPLETE)
CN-396 board (COMPLETE) (Note 1, 2)
SY-211 board (COMPLETE) (Note 3)
IC101 (4GB NAND Flash) (Note 2)
SE510 (PITCH, YAW sensor)
Click on the first or last page to see other DSC-G3 (serv.man3) service manuals if exist.