Read Sony DSC-F88 (serv.man3) Service Manual online
SERVICE MANUAL
• INSTRUCTION MANUAL is shown at the end of this document.
LEVEL
1
Link
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
Link
Revision History
Revision History
Sony EMCS Co.
Ver. 1.2 2007.10
DIGITAL STILL CAMERA
Photo: Silver
DSC-F88
2007J0500-1
© 2007.10
Published by Kohda TEC
9-876-750-42
US Model
Canadian Model
AEP Model
UK Model
E Model
Hong Kong Model
Australian Model
Chinese Model
Korea Model
Tourist Model
Japanese Model
Revised-1
Replace the previously issued
SERVICE MANUAL 9-876-750-41
with this manual.
SERVICE MANUAL 9-876-750-41
with this manual.
— 2 —
DSC-F88
SPECIFICATIONS
[LCD screen]
LCD panel used
4.6 cm (1.8 type) TFT drive
Total number of dots
134 000 (560
×240) dots
[Input and Output connectors]
Multi connector
USB communication
Hi-Speed USB (USB 2.0 compliant)
[Power, general]
Used battery pack
NP-FR1
Power requirements
3.6 V
Power consumption (during shooting with LCD
screen on)
1.4 W
1.4 W
Operating temperature range
0
° to +40°C (32° to +104°F)
Storage temperature range
−20° to +60°C (−4° to +140°F)
Dimensions
97.8
× 74.4 × 25.6 mm
(3 7/8
× 3 × 1 1/16 inches)
(W/H/D, protruding portions not
included)
included)
Mass
Approx. 163 g (5.7 oz) (battery pack
NP-FR1, “Memory Stick,” wrist
strap, and so on included)
NP-FR1, “Memory Stick,” wrist
strap, and so on included)
Microphone
Electret condenser microphone
Speaker
Dynamic speaker
Exif Print
Compatible
PRINT Image Matching II
Compatible
PictBridge
Compatible
x
AC-LS5/LS5B AC Adaptor
Input rating
100 V to 240 V AC, 50/60 Hz, 11 W,
0.16 A to 0.09 A
0.16 A to 0.09 A
Output rating 4.2 V DC, 1.5 A
Operating temperature range
0
° to +40°C (32° to +104°F)
Storage temperature range
−20° to +60°C (−4° to +140°F)
Dimensions (excluding projecting parts)
Approx. 48
× 29 × 81 mm
(1 15/16
× 1 3/16 × 3 1/4 inches)
(W/H/D)
Mass
Approx. 130 g (5 oz) excluding
power cord (mains lead)
power cord (mains lead)
x
NP-FR1 battery pack
Used battery Lithium-ion battery
Maximum voltage
DC 4.2 V
Nominal voltage
DC 3.6 V
Capacity
4.4 Wh (1 220 mAh)
Accessories
• AC-LS5/LS5B AC Adaptor (1)
• Power cord (mains lead) (1)
• NP-FR1 battery pack (1)
• Battery case (1)
• USB multi cable (1)
• A/V multi cable (1)
• Wrist strap (1)
• “Memory Stick” (32MB) (1)
• CD-ROM (USB driver: SPVD-012) (1)
• Operating Instructions (1)
See page 6.
• Power cord (mains lead) (1)
• NP-FR1 battery pack (1)
• Battery case (1)
• USB multi cable (1)
• A/V multi cable (1)
• Wrist strap (1)
• “Memory Stick” (32MB) (1)
• CD-ROM (USB driver: SPVD-012) (1)
• Operating Instructions (1)
See page 6.
Design and specifications are subject to change
without notice.
without notice.
x
Camera
[System]
Image device 7.66 mm (1/2.4 type) color
CCD
Primary color filter
Primary color filter
Total pixels number of camera
Approx. 5 255 000 pixels
Effective pixels number of camera
Approx. 5 090 000 pixels
Lens
Carl Zeiss Vario-Tessar
3
3
× zoom lens
f=6.7 to 20.1 mm (35 mm camera
conversion: 38 to 114 mm)
F3.5-4.2
conversion: 38 to 114 mm)
F3.5-4.2
Exposure control
Automatic, Manual exposure, Scene
selection (10 modes)
selection (10 modes)
White balance
Automatic, Daylight, Cloudy,
Fluorescent, Incandescent
Fluorescent, Incandescent
File format (DCF compliant)
Still images: Exif Ver. 2.2, JPEG
compliant, DPOF compatible
Movies: MPEG1 compliant
(Monaural)
compliant, DPOF compatible
Movies: MPEG1 compliant
(Monaural)
Recording medium
“Memory Stick”
Flash
Recommended distance (when ISO
sensitivity is set to Auto)
0.15 to 2.2 m (6 inches to
7 feet 2 5/8 inches) (W)
0.25 to 2 m (9 7/8 inches to
6 feet 6 3/4 inches) (T)
sensitivity is set to Auto)
0.15 to 2.2 m (6 inches to
7 feet 2 5/8 inches) (W)
0.25 to 2 m (9 7/8 inches to
6 feet 6 3/4 inches) (T)
— 3 —
DSC-F88
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
— 4 —
DSC-F88
[Description on Self-diagnosis Display]
Self-diagnosis display
• C: ss: ss
You can reverse the camera
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
• E: ss: ss
Contact your Sony dealer or local
authorized Sony service facility.
authorized Sony service facility.
Display Code
C:32:ss
C:13:ss
Countermeasure
Turn the power off and on again.
Format the “Memory stick”.
Insert a new “Memory Stick”.
Cause
Trouble with hardware.
Unformatted memory stick is inserted.
Memory stick is broken.
Caution Display During Error
SYSTEM ERROR
FORMAT ERROR
MEMORY STICK ERROR
E:61:ss
E:91:ss
Checking of lens drive circuit.
When failed in the focus and zoom
initialization.
initialization.
Abnormality when flash is being
charged.
charged.
Checking of flash unit or replacement
of flash unit.
of flash unit.
—
SELF-DIAGNOSIS FUNCTION