Read Sony DSC-F717 (serv.man3) Service Manual online
12
, Connect the power cord (mains
lead) to the AC power adaptor
and then to a wall outlet (wall
socket).
and then to a wall outlet (wall
socket).
The /CHG lamp (orange) lights up when
charging begins, and goes off when
charging is completed.
charging begins, and goes off when
charging is completed.
• After charging the battery pack, disconnect the
AC power adaptor from the DC IN jack of your
camera.
camera.
To remove the battery pack
Open the battery/“Memory Stick” cover.
Slide the battery eject lever in the direction
of the arrow, and remove the battery pack.
Slide the battery eject lever in the direction
of the arrow, and remove the battery pack.
• Be careful not to drop the battery pack when
removing it.
Battery remaining indicator
The battery remaining indicator on the screen
shows the remaining shooting or viewing time.
shows the remaining shooting or viewing time.
• The displayed remaining time may not be
correct under certain circumstances or
conditions.
conditions.
• When you switch the FINDER/LCD switch, it
takes about one minute for the correct battery
remaining time to appear.
remaining time to appear.
Charging time
Approximate time to charge a completely
discharged battery pack using the AC-L10A/
L10B AC power adaptor at a temperature of 25°C
(77°F).
discharged battery pack using the AC-L10A/
L10B AC power adaptor at a temperature of 25°C
(77°F).
4
Power cord
(mains lead)
(mains lead)
AC power adaptor
2
To wall outlet (wall socket)
1
/CHG lamp
Battery eject lever
Battery pack
Charging time
(min.)
(min.)
NP-FM50 (supplied) Approx. 150
2560
6
60min
101
Click on the first or last page to see other DSC-F717 (serv.man3) service manuals if exist.