Read Sony DSC-F505V (serv.man2) Service Manual online
1-4
Getting
sta
rted
15
Inserting the “Memory Stick”
Open the battery/“Memory Stick” cover, then press the “Memory Stick” once lightly.
Notes
•
Insert the “Memory Stick” firmly until it clicks, otherwise a message such as “MEMORY
STICK ERROR” will be displayed.
STICK ERROR” will be displayed.
•
Never remove the “Memory Stick” or turn off the power while the access lamp is lit up.
•
You cannot record or edit images on a “Memory Stick” if the erasure prevention switch is set to
the LOCK position.
the LOCK position.
1
Open the battery/“Memory Stick” cover.
Open the cover while sliding the OPEN switch in the direction of the arrow.
2
Insert the “Memory Stick.”
Insert the “Memory Stick” with the
B mark facing toward the battery
compartment as illustrated until it clicks.
3
Close the battery/“Memory Stick” cover.
Removing the “Memory Stick”
Access lamp
“Memory Stick”
OC
Erasure prevention switch
Connector
Label space
16
Basic operations
B Recording
Recording still images
Still images are recorded in JPEG format.
To record still images, slide the POWER switch to the right to turn on the power and
insert a “Memory Stick.”
To record still images, slide the POWER switch to the right to turn on the power and
insert a “Memory Stick.”
∗
Exposure and focus are automatically adjusted.
The number of images you can record on a “Memory Stick”
See pages 37 to 39.
Notes
•
While the image is being recorded on the “Memory Stick,” do not shake or strike the camera.
Also, do not turn the power off, or remove the battery pack or “Memory Stick.”
Also, do not turn the power off, or remove the battery pack or “Memory Stick.”
•
When recording a bright subject, the LCD screen color may change after AE lock, but this does
not affect the recorded image.
not affect the recorded image.
1
Set the MODE selector to STILL.
2
Press and hold the shutter button halfway
down and check the image.
down and check the image.
While the AE lock indicator
z
(green) is flashing,
the image freezes momentarily, but is not yet
recorded. When the camera finishes the automatic
adjustments*, the AE lock indicator
recorded. When the camera finishes the automatic
adjustments*, the AE lock indicator
z
lights up
and the camera is ready for recording.
To cancel the recording, release the shutter button.
To cancel the recording, release the shutter button.
3
Press the shutter button fully down.
The shutter sounds and the image is recorded on the “Memory Stick.”
When “RECORDING” disappears, you can record the next image.
When “RECORDING” disappears, you can record the next image.
POWER switch
AE lock indicator
Remaining memory
capacity indicator
BBBB
Rec
or
ding
ding
17
You can check the last recorded image by clearing the menu bar from the screen
(page 32) and pressing
(page 32) and pressing
b on the control button. To return to the normal recording
mode, press lightly on the shutter button or select [RETURN] with
b/B on the
control button and then press the center
z. You can also delete the image first by
selecting [DELETE] on the Quick Review screen with
b/B on the control button and
pressing the center
z, and then selecting [OK] with v/V on the control button and
pressing the center
z.
Minimum focal distance to the subject
W side: About 9 7/8 inches (25 cm) or more
T side: About 31 1/2 inches (80 cm) or more
To record even closer subjects, see page 40.
T side: About 31 1/2 inches (80 cm) or more
To record even closer subjects, see page 40.
Digital zoom function
This camera has a digital zoom function.
Digital zoom enlarges the image by digital processing and it starts to function when
zoom exceeds 5
Digital zoom enlarges the image by digital processing and it starts to function when
zoom exceeds 5
×
.
Using digital zoom
•
The maximum zoom magnification is 10
×
.
•
Digital zooming deteriorates the picture quality. When digital zoom is not
necessary, set [DIGITAL ZOOM] to [OFF] in the menu settings (page 35).
necessary, set [DIGITAL ZOOM] to [OFF] in the menu settings (page 35).
Note
Digital zoom does not work for moving images.
Checking the last recorded image (Quick Review)
Using the zoom feature
T side: for telephoto (subject appears closer)
Zoom lever
W side: for wide-angle (subject appears
farther away)
farther away)
The T side of the bar shows the
digital zooming zone.
digital zooming zone.
18
You can adjust the angle by turning the lens part upward up to 90 degrees and
downward up to 50 degrees.
downward up to 50 degrees.
Press DISPLAY to turn on/off the indicators on the LCD screen.
See page 65 for a detailed description of the indicated items.
See page 65 for a detailed description of the indicated items.
Notes
•
You cannot turn off the self-timer indicators and some of the indicators used in advanced
operations.
operations.
•
The indicators on the LCD screen are not recorded.
Changing the lens orientation
LCD screen indicators during recording
MODE selector
90°
Lens part
50°
DISPLAY
Click on the first or last page to see other DSC-F505V (serv.man2) service manuals if exist.