Read Sony DSC-F505 (serv.man3) Service Manual online
– 1 –
DSC-F505
AEP Model
UK Model
SERVICE MANUAL
DIGITAL STILL CAMERA
MICROFILM
SPECIFICATIONS
System
Recording format
Recording format
Digital (JPEG based)/Field
recording
recording
Video signal
NTSC color, EIA standards
PAL color CCIR standards
PAL color CCIR standards
Image device
1/2-inch CCD (total number
of square pixels : 1636 x 1236),
square grid, primary color filter
Interface format
of square pixels : 1636 x 1236),
square grid, primary color filter
Interface format
Lens
ƒ = 7.1 - 35.5 mm (38 - 190 mm, when
converted into a 35 mm still camera)
0.5 m -
converted into a 35 mm still camera)
0.5 m -
∞
(“W” side)
0.08 m -
∞
(Macro, “W” side)
F = 2.8 - 3.3
Photometric system
TTL system
Exposure control
Automatic exposure
White balance
Automatic, Indoor, Outdoor,
One-push
One-push
Data compression system
Movie : MPEG-1
Still : JPEG
Audio (with still image) :
MPEG AUDIO (Monaural)
Still : JPEG
Audio (with still image) :
MPEG AUDIO (Monaural)
Data format
Still : 1600 x 1200
1024 x 768
640 x 480
320 x 240 (E-mail)
640 x 480
320 x 240 (E-mail)
Movie : 320 x 240, 160 x 112
Memory
“Memory stick”
Flash
Recording distance
limitations : 11
limitations : 11
7
/
8
inches to 8
1
/
3
feet
(0.3 m to 2.5 m), automatic flash
control system
control system
Shutter speed
NTSC : 1/8 - 1/725
PAL : 1/6 - 1/600
PAL : 1/6 - 1/600
LCD screen
Screen size
Screen size
2 inches
LCD panel
TFT
Total dot number
122,980 (559 x 220) dots
Input and output connectors
A/V out (Monaural)
A/V out (Monaural)
Minijack
Video : 1Vp-p, 75 ohms,
unbalanced, sync negative
Audio : monaural, 327 mV
(at output, impedance more than
47 kilohms)
Output impedance with less than
2.2 kilohms
Video : 1Vp-p, 75 ohms,
unbalanced, sync negative
Audio : monaural, 327 mV
(at output, impedance more than
47 kilohms)
Output impedance with less than
2.2 kilohms
Digital I/O (serial)
Minijack
RS-232C based, 9.6 Kbps to
115.2 Kbps
RS-232C based, 9.6 Kbps to
115.2 Kbps
Digital I/O (USB)
Special minijack
USB 1.0 based
USB 1.0 based
General
Power consumption
Power consumption
Using the AC power
adaptor/charger :
adaptor/charger :
Recording : 3.6 W
Playback : 3.1 W
Playback : 3.1 W
Using the rechargeable
NP-FS11 lithium ion battery :
NP-FS11 lithium ion battery :
Recording : 3.3 W
Playback : 2.7 W
Playback : 2.7 W
Operation temperature
32°F to 104°F (0°C to 40°C)
Storage temperature
-4°F to 140°F (-20°C to 60°C)
Dimensions
Approx. 4
1
/
4
x 2
1
/
2
x 5
3
/
8
in.
(107.2 x 62.2 135.9 mm)
(w / h / d)
(w / h / d)
Mass
Approx. 15 oz (435 g)
(excluding batteries)
Approx. 1 lb (475 g)
(including battery,
“Memory stick” (4 MB),
wrist strap and lens cap etc.)
(excluding batteries)
Approx. 1 lb (475 g)
(including battery,
“Memory stick” (4 MB),
wrist strap and lens cap etc.)
AC-VF10 AC power adaptor/
charger
Power requirements
charger
Power requirements
100 to 240 V AC, 50/60 Hz
Power consumption
13 W
Output voltage
DC OUT : 4.2 V, 1.8 A in operating
mode
Battery charge terminal :
4.2 V, 1.5 A in charge mode
mode
Battery charge terminal :
4.2 V, 1.5 A in charge mode
Operation temperature
32°F to 104°F (0°C to 40°C)
Storage temperature
-4°F to 140°F (-20°C to 60°C)
Approx. 1
Approx. 1
15
/
16
x 1
9
/
16
x 3
3
/
8
in.
(49 x 39 x 85 mm) (w / h / d)
Mass
Approx. 4.2 oz. (120 g)
(excluding batteries)
(excluding batteries)
NP-FS11 battery pack
Voltage
Voltage
DC 3.6 V
Capacity
4.1 Wh
Type
Lithium ion type
Design and specifications are subject
to change without notice.
to change without notice.
Level 1
Ver 1.0 1999. 09
– 2 –
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
!
OR DOTTED LINE WITH
MARK
!
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
– 3 –
TABLE OF CONTENTS
SERVICE NOTE
Self-Diagnosis Display ................................................................. 4
1.
MAIN PARTS
1.
Ornamental parts ................................................................ 5
2.
DISASSEMBLY
2-1.
Removal of Rear Cabinet Block ......................................... 6
2-2.
Removal of Zoom Lens Block .......................................... 7
2-3
Removal of Cabinet (LT) Block ......................................... 7
2-4.
Removal of Lens Block ..................................................... 7
2-5.
Removal of LCD Panel Block and
Control Switch Block (FK) ................................................ 8
Control Switch Block (FK) ................................................ 8
2-6.
Removal of HI-70, DD-131 Boards and
Battery Holder Block .......................................................... 8
Battery Holder Block .......................................................... 8
2-7.
Removal of Upper Cabinet Block ........................................ 9
2-8.
Removal of Front Cabinet Assembly .................................. 9
2-9.
Removal and Attaciment of FP-133 Flexible Board ........ 10
2-10. To Fold the New FP-133 Flexible Board ......................... 10
2-11. Removal of Crystal Indication Module ............................ 11
2-12. Removal of Flash Unit (ST) .............................................. 11
2-11. Removal of Crystal Indication Module ............................ 11
2-12. Removal of Flash Unit (ST) .............................................. 11
3.
REPAIR PARTS LIST
3-1.
Exploded Views ................................................................ 12
3-1-1. Battery Holder Assembly ................................................. 12
3-1-2. Front Cabinet Assembly ................................................... 13
3-1-3. Rear Cabinet Assembly .................................................... 14
3-1-4. Lens Cabinet Assembly .................................................... 15
3-1-5. Lens Assembly ................................................................. 16
3-1-2. Front Cabinet Assembly ................................................... 13
3-1-3. Rear Cabinet Assembly .................................................... 14
3-1-4. Lens Cabinet Assembly .................................................... 15
3-1-5. Lens Assembly ................................................................. 16
4.
GENERAL
Parts identification ...................................................................... 17
Preparation .................................................................................. 18
Preparation .................................................................................. 18
1 Charging the battery pack .............................................. 18
2 Installing the battery pack and “Memory Stick” ........... 19
3 Setting the date and time ............................................... 19
2 Installing the battery pack and “Memory Stick” ........... 19
3 Setting the date and time ............................................... 19
Recording ................................................................................... 20
Recording still images ...................................................... 20
Recording moving images ................................................ 20
Recording moving images ................................................ 20
Playing back ............................................................................... 21
Playing back still images .................................................. 21
Playing back moving images ............................................ 21
Viewing images using a personal computer ..................... 21
Playing back moving images ............................................ 21
Viewing images using a personal computer ..................... 21
Various ways of recording .......................................................... 24
Various ways of playback ........................................................... 26
Changing the menu setting ......................................................... 29
Using image data with other equipment ..................................... 30
Additional information ............................................................... 31
Various ways of playback ........................................................... 26
Changing the menu setting ......................................................... 29
Using image data with other equipment ..................................... 30
Additional information ............................................................... 31
– 4 –
Self-diagnosis display
• C:
ππ: ππ
You can reverse the camera
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
• E:
ππ: ππ
Contact your Sony dealer or local
authorized Sony service facility.
authorized Sony service facility.
[Description on Self-diagnosis Display]
SERVICE NOTE
Display Code
C:04:
ππ
C:32:
ππ
C:13:
ππ
E:61:
ππ
E:91:
ππ
Countermeasure
Use a NP-FS11/F10 battery pack.
Turn the power off and on again.
Format the “Memory stick”.
Insert a new “Memory Stick”.
Checking of lens drive circuit.
Cause
You are using a basttery pack that is not an
“InfoLITHIUM” battery pack.
“InfoLITHIUM” battery pack.
Trouble with hardware.
Unformatted memory stick is inserted.
Memory stick is broken.
When failed in the focus and zoom
initialization.
initialization.
Abnormality when flash is being
charged.
charged.
Checking of flash unit or replacement
of flash unit.
of flash unit.
Caution Display During Error
for “InfoLITHIUM” BATTERY
ONLY
ONLY
SYSTEM ERROR
FORMAT ERROR
MEMORY STICK ERROR
—
