Read Sony AMOUNT_LENS Service Manual online
– 10 –
LENS GENERAL ADJUSTMENT GUIDE
1-2.
Connection of Finished Inspection JIG/Half Completion JIG/Finished Inspection
JIG II and Startup of Lens Adjustment Program
JIG II and Startup of Lens Adjustment Program
1-2-1. Connection of Finished Inspection JIG/SSM Half Completion JIG and Startup of Lens
Adjustment Program (ActuatorChecker/ActuatorChecker2)
Note 1:
Confirm that “1-1-1. ActuatorChecker/ActuatorChecker2 (For Using Finished Inspection JIG (J-6082-645-A))” has been
completed before this procedure is executed.
Note 2:
In case of performing Finished inspection or Half completion inspection, be sure to perform in the condition that the lens is laid
down (do not perform in the lens standing condition).
Equipment
• Personal Computer
• Finished Inspection JIG (AC 100 V only)
(J-6082-645-A)
• Lens Adjustment Program (ActuatorChecker.exe/ActuatorChecker2.exe)
• Half Completion JIG (At half completion inspection)
(J-6083-662-A)
1.
Connection
Connect equipment and checking lens as shown in Fig.1-2-1 or Fig.1-2-2.
• Final
Fig.1-2-1
• Half
Example: SAL2470Z
Fig.1-2-2
Finished Inspection JIG
Lens
Finished Inspection JIG
Half Completion JIG
Lens
Encoder Flexible
MR Flexible
Motor Flexible
Motor Flexible
MR Flexible
Encoder Flexible
Half Completion
ADJ Stand
ADJ Stand
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2009.05
Click on the first or last page to see other AMOUNT_LENS service manuals if exist.