Read Sony AMOUNT_LENS Service Manual online
LENS GENERAL ADJUSTMENT GUIDE
Sony Corporation
Revision History
Revision History
LENS GENERAL ADJUSTMENT GUIDE
LENS FOR DSLR CAMERA
9-852-626-14
2014D08-1
©2014.04
Published by Sony Techno Create Corporation
Ver. 1.3 2014.04
LENS FOR DSLR CAMERA (
LENS)
This service manual covers the general confirmation and adjustment of the lens for Digital Single Lens
Reflex camera.
Reflex camera.
• Use this manual together with the service manual of each model.
このサービスマニュアルは, 一眼レフカメラ用レンズの一般確認および調整要項についてまと
めたものです。
・ 各機種のサービスマニュアルとともにお使いください。
めたものです。
・ 各機種のサービスマニュアルとともにお使いください。
Revised-3
Replace the previously issued
OPERATION MANUAL 9-852-626-13
with this Manual.
OPERATION MANUAL 9-852-626-13
with this Manual.
– 2 –
LENS GENERAL ADJUSTMENT GUIDE
1. PREPARATIONS
1-1.
Installation of Lens Adjustment Program
Confirm the using of Finished Inspection JIG or Finished Inspection JIG II referring the “List of Service Tools and Equipments” in each
service manual.
Install ActuatorChecker/ActuatorChecker2 (Finished Inspection JIG) or ActuatorCheckerSAM (Finished Inspection JIG II) for the JIG
used.
1-1-1. ActuatorChecker/ActuatorChecker2 (For Using Finished Inspection JIG (J-6082-645-A))
Equipment used
• Personal Computer
• Lens Adjustment Program (ActuatorChecker/ActuatorChecker2.VerX.XX.zip)
• PC Card Setup File (InstaCal.zip)
Note 1:
Lap top PC with PC card slot on which Windows XP runs
Note 2:
Obtain the PC card setup file (InstaCal.zip) from the TISS homepage.
Note 3:
Obtain the lens adjustment program (ActuatorChecker/ActuatorChecker2 VerX.XX.zip) from the TISS homepage.
1. Download of PC card setup file (InstaCal.zip)
1)
Create the “MCC”folder in the C drive.
Fig.1-1-1
2)
Download the file from Service Fixture and Software of TISS homepage, and save it in “C:\MCC”.
3)
Double-click the downloaded file “InstaCal.zip”to extract it.
4)
The window to specify the extract destination folder appears. Click
[Browse...]
.
Fig.1-1-2
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2009.05
– 3 –
LENS GENERAL ADJUSTMENT GUIDE
5)
Specify “C:\MCC” for the extract destination folder.
Fig.1-1-3
6)
The window returns to the menu to specify the extract destination folder. Click
[Unzip]
.
Fig.1-1-4
7)
When the window below appears, click [OK].
Fig.1-1-5
8)
Return to the menu to specify the extract destination folder. Then, click
[Close]
to close the window.
– 4 –
LENS GENERAL ADJUSTMENT GUIDE
2. Setup of PC Card
1)
Double-click “InstaCal.msi” in “C:\MCC” folder to begin the installation.
Fig.1-1-6
2)
The menu to begin the installation appears. Click
[Next>]
.
Fig.1-1-7
3)
Specify the install destination folder. As the default is used for it, click
[Next>]
.
Fig.1-1-8