XR-CA665EE - Sony Car Audio Service Manual (repair manual). Page 6

Read Sony XR-CA665EE Service Manual online

6
XR-CA665EE
Precautions
Choose the installation location carefully so
that the unit will not interfere with normal
driving operations.
Avoid installing the unit in areas subject to
dust, dirt, excessive vibration, or high
temperatures, such as in direct sunlight or near
heater ducts.
Use only the supplied mounting hardware for
a safe and secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 20°.
Removing the protection collar
and the bracket (
4
)
Before installing the unit, remove the
protection collar 
4
 and the bracket 
1
 from
the unit.
1
Remove the protection collar 
4
.
1
Engage the release keys 7 together with
the protection collar 4 .
2
Pull out the release keys 7 to remove the
protection collar 4.
2
Remove the bracket 
1
.
1
Insert both release keys 7 together
between the unit and the bracket 1 until
they click.
2
Pull down the bracket 1, then pull up the
unit to separate.
Mounting example (
5
)
Installation in the dashboard
Notes
• Bend these claws outward for a tight fit, if
necessary 
(
5
-2)
.
• Make sure that the 4 catches on the protection
collar  4 are properly engaged in the slots of the
unit 
(
5
-3)
.
Mounting the unit in a Japanese
car (
6
)
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult
your Sony dealer.
Note
To prevent malfunction, install only with the
supplied screws  
8.
How to detach and attach the
front panel (
7
)
Before installing the unit, detach the front
panel.
7
-A   To detach
Before detaching the front panel, be sure to
press (OFF). Press (OPEN), then slide the front
panel to the right side, and pull out the left side.
7
-B   To attach
Place the hole A in the front panel onto the spindle
B
 on the unit as illustrated, then push the left side
in.
Warning when installing in a car
without ACC (accessory)
position on the ignition key
switch
After turning off the ignition, be sure to
press and hold 
(OFF)
 on the unit until the
display disappears.
Otherwise, the display does not turn off and this
causes battery drain.
RESET button
When the installation and connections are
completed, be sure to press the RESET button
with a ballpoint pen, etc., after detaching the
front panel.
Power connection diagram
Auxiliary power connector may vary depending
on the car. Check your car’s auxiliary power
connector diagram to make sure the connections
match correctly. There are three basic types
(illustrated below). You may need to switch the
positions of the red and yellow leads in the car
stereo’s power connecting cord.
After matching the connections and switched
power supply leads correctly, connect the unit to
the car’s power supply. If you have any
questions and problems connecting your unit
that are not covered in this manual, please
consult the car dealer.
Auxiliary power connector
Вспомогательный разъем питания
the car without ACC position
автомобиль не имеет положения АСС
Red
Красный
Yellow
Желтый
Red
Красный
Yellow
Желтый
Red
Красный
Yellow
Желтый
4
Yellow
Желтый
switched power supply
включенное питание
Red
Красный
Yellow
Желтый
Red
Красный
Yellow
Желтый
Red
Красный
Yellow
Желтый
Red
Красный
continuous power supply
непрерывное поступление питания
7
4
Yellow
Желтый
continuous power supply
непрерывное поступление питания
Red
Красный
switched power supply
включенное питание
7
Page of 33
Display

Click on the first or last page to see other XR-CA665EE service manuals if exist.