Read Sony XR-C6093SP Service Manual online
– 14 –
Procedure:
1. Put the set into the FWD PB mode.
2. Adjust adjustment resistor for inside capstan motor so that the
1. Put the set into the FWD PB mode.
2. Adjust adjustment resistor for inside capstan motor so that the
reading on the speed checker or frequency counter becomes in
specification.
specification.
Specification: Constant speed
Adjustment Location: See page 17.
DOLBY Level Adjustment
Setting:
Preset
[3]
(DOLBY) button
: NR OFF
SEL (BAS) button
: Center
SEL (TRE) button
: Center
SEL (BAL) button
: Center
SEL (FAD) button
: Center
SEL (VOL) button
: Maximum
D-BASS control
: OFF
Procedure:
1. Put the set into the FWD PB mode.
2. Adjust RV121 (L-CH) and RV221 (R-CH) so that the level
1. Put the set into the FWD PB mode.
2. Adjust RV121 (L-CH) and RV221 (R-CH) so that the level
meter reading is –6 ± 0.5 dB (0.37 to 0.41 V).
Adjustment Location: See page 17.
See the adjustment location from on page 17 for the
adjustment.
adjustment.
Tape Speed Adjustment
Setting:
Speed checker
Frequency counter
–2 to +3%
2,940 to 3,090 Hz
4. Repeat the above adjustment for the REV PB mode.
5. Check that output level difference between FWD PB mode
5. Check that output level difference between FWD PB mode
and REV PB mode is within 4 dB.
Adjustment Location: PB head
REV FWD
adjustment screws
+
–
speed checker
or
frequency counter
test tape
WS-48A
(3 kHz, 0 dB)
WS-48A
(3 kHz, 0 dB)
speaker out terminal
set
4
Ω
+
–
–
level meter
MAIN board
L-CH: TP101 (DOLBY-L)
R-CH: TP201 (DOLBY-R)
R-CH: TP201 (DOLBY-R)
test tape
P-4-D400
(400 Hz, 0 dB)
P-4-D400
(400 Hz, 0 dB)
set
Click on the first or last page to see other XR-C6093SP service manuals if exist.