Read Sony XR-C6090R / XR-C6100R Service Manual online
– 42 –
Pin No.
Pin Name
I/O
Function
33
MTLON
I/O
34
CMON
O
Capstan/reel motor (M901) drive signal output terminal “H”: motor on
35
TAPEON
O
Tape system power supply on/off control signal output terminal “H”: tape on
36
ACCON
I
Accessory detect signal input terminal “L”: accessory on
37
PLLSI
I
PLL serial data input from the FM/AM PLL (IC1)
38
BEEP
O
Beep sound output terminal
39
LCDCKO
O
Serial data transfer clock signal output to the liquid crystal display driver (IC901)
40
LCDSO
O
Serial data output to the liquid crystal display driver (IC901)
41
LCDINH
O
Blank indicate control signal output to the liquid crystal display driver (IC901)
“L”: no display
“L”: no display
42
LCDCE
O
Chip enable output to the liquid crystal display driver (IC901)
43
UNICKO
O
Serial data transfer clock signal output to the bus interface (IC701) (for SONY bus)
44
UNICKI
I
Serial data reading clock signal input terminal (for SONY bus)
45
UNISI
I
Serial data input from the bus interface (IC701) (for SONY bus)
46
UNISO
O
Serial data output to the bus interface (IC701) (for SONY bus)
47
VDD
—
Power supply terminal (+5V)
48
AVDD
—
Power supply terminal (+5V) (for A/D converter)
49
AVREF+
I
Reference voltage input terminal (+5V) (for A/D converter)
50
KEYIN1
I
51
KEYIN0
I
52
D-BASS
I
D-BASS switch (SW951) input (A/D input)
53
KEYSEL
I
Setting terminal for the key (fixed at “L”)
54
DSTSEL
I
Destination setting terminal
AEP, UK, South European models: fixed at “L”, German model: fixed at “H”
AEP, UK, South European models: fixed at “L”, German model: fixed at “H”
55
RCIN0
I
Rotary remote commander shift key A/D input terminal
56
VSM1
I
Signal meter voltage detection input terminal Not used (fixed at “L”)
57
VSM0
I
FM and AM (MW/LW) signal meter voltage detection input from the FM/AM tuner unit (TU1)
58
AVREF–
I
Reference ground terminal
59
AVSS
—
Ground terminal (for A/D converter)
60
GND
—
Ground terminal
61
BUSON
O
Bus on/off control signal output to the bus interface (IC701) (for SONY bus) “L”: bus on
62
SYSRST
O
Reset signal output to the bus interface (IC701) (for SONY bus) “L”: reset
63
SEKOUT
O
Seek control signal output to the FM/AM tuner unit (TU1)
64
TUNON
O
Tuner system power supply on/off control signal output to the BA3918 (IC601) “H”: tuner on
65
FM ON
O
FM system power supply on/off control signal output to the BA3918 (IC601) “H”: FM on
Key input terminal (A/D input)
XR-C6090R: OFF, SOURCE, MODE
XR-C6090R: OFF, SOURCE, MODE
*, + ) + SEEK AMS, – = 0 SEEK AMS,
VOLUME –, SEL, VOLUME +, ATT , BTM SENS keys input (LSW901 to LSW910)
XR-C6100R: OFF, SOURCE, MODE
XR-C6100R: OFF, SOURCE, MODE
*, + ) + SEEK AMS, – = 0 SEEK AMS,
VOLUME –, SEL, VOLUME +, DSPL, ATT, BTM SENS keys input
(LSW901 to LSW911)
(LSW901 to LSW911)
Key input terminal (A/D input)
XR-C6090R:
XR-C6090R:
6, INTRO 1, REPEAT 2, SHUF/a 3, BL SKIP 6, ATA 5, BANK 4, FILE PTY,
AF/TA, PRESET DISC +/–, DSPL keys input (LSW921 to LSW932)
XR-C6100R:
XR-C6100R:
6, INTRO 1, REPEAT 2, SHUF/a 3, BL SKIP 6, ATA 5, BANK/MTL 4, FILE
PTY, AF/TA, PRESET DISC +/– keys input (LSW921 to LSW931)
METAL control in/out terminal
At initial mode: valid/invalid selection input of METAL function (“L” input: valid)
At normal mode: METAL on/off control signal output to the CXA2510AQ (IC351)
“H”: METAL on
XR-C6090R: Not used this function in this set (fixed at “H”)
XR-C6100R: Used for the this function
At initial mode: valid/invalid selection input of METAL function (“L” input: valid)
At normal mode: METAL on/off control signal output to the CXA2510AQ (IC351)
“H”: METAL on
XR-C6090R: Not used this function in this set (fixed at “H”)
XR-C6100R: Used for the this function
Click on the first or last page to see other XR-C6090R / XR-C6100R service manuals if exist.