Read Sony XM-S400D Service Manual online
XM-S400D
5
SECTION 3
DISASSEMBLY
•
This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
Note: Follow the disassembly procedure in the numerical order given.
3-2. CHASSIS BOTTOM BLOCK
SET
3-2. CHASSIS BOTTOM BLOCK
(Page
(Page
5)
3-3. HEAT TRANSFER SHEET (CHIP), MAIN BOARD
(Page
(Page
6)
1 screw
(2.6
(2.6
u 8)
2 two screws
(M2) (L = 6 mm)
2 two screws
(M2) (L = 6 mm)
– Bottom view –
+RZWRLQVWDOOWKHFKDVVLVERWWRPEORFN
4 Lift up the chassis bottom
block in the direction
of the arrow.
5 claw
5 claw
6 claw
6 claw
chassis bottom block
7 Draw the POWER/OUTPUT connector
out of the hole in chassis bottom block.
8 chassis bottom block
POWER/OUTPUT
connector
connector
hole
two holes
1 Align the position of the hole of
the chassis bottom block and
the POWER/OUTPUT connector,
and then insert.
POWER/OUTPUT
connector
connector
hole
4 claw
4 claw
3 two claws
chassis bottom block
3 Insert a rod with a blunt tip into the hole,
and slightly lift the chassis bottom block.
Note: Do not use a metal tool with a sharp tip.
2 Push down the chassis bottom block
in the direction of the arrow, and lock
the four claws.
POWER/OUTPUT
connector side
connector side
Click on the first or last page to see other XM-S400D service manuals if exist.