Read Sony XAV-A1 Service Manual online
11
XAV-A1
9
FRONT L/R
REAR L/R
SUB OUT (MONO)
REAR MONITOR OUT
AUX 2
AUX 3
To the +12 V power terminal which is
energized at all times
energized at all times
*1
*1 Be sure to connect the black ground lead to it first.
*2 First connect the black ground lead, then connect the yellow and red power input leads.
*3 When your car has built-in FM/AM antenna in the rear/side glass, see “Notes on the control and power
*2 First connect the black ground lead, then connect the yellow and red power input leads.
*3 When your car has built-in FM/AM antenna in the rear/side glass, see “Notes on the control and power
supply leads” (page 7).
*4 This connection is only for amplifiers. Connecting any other system may damage the unit.
*5 It is not necessary to connect this lead if there is no power antenna or antenna booster, or with a manually-
*5 It is not necessary to connect this lead if there is no power antenna or antenna booster, or with a manually-
operated telescopic antenna.
Note on the accessory power input lead (red)
If there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times.
If there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times.
Yellow (0.35 m)
Red (0.25 m)
Orange/white (0.25 m)
Purple/White (5m)
Fuse (10 A)
Light green (2.5 m)
Parking brake switch lead of car
Tap 9
To the +12 V power terminal which is
energized in the accessory position of
the ignition key switch
energized in the accessory position of
the ignition key switch
*1*3
To a car’s illumination signal
*1
To the + 12 V power terminal of the
back lamp lead of car
back lamp lead of car
To a metal surface of the car
*2
Blue/white (0.25 m)
Blue (0.25 m)
To AMP REMOTE IN of an optional
power amplifier
power amplifier
*4
To the power antenna control lead or
power supply lead of antenna booster
amplifier
power supply lead of antenna booster
amplifier
*3*5
Front speakers
(optional)
(optional)
Rear speakers
(optional)
(optional)
White
White/black
Gray
Gray/black
Green
Green/black
Purple
Purple/black
RCA interconnects
(optional)
(optional)
RCA interconnects
(optional)
(optional)
RCA interconnects
(optional)
(optional)
Left
Right
Left
Right
Black (0.35 m)
Max. supply current 0.3 A
Max. supply current 0.3 A
Amplifiers
(optional)
(optional)
To XM tuner (optional)
Connection
box 1
box 1
Power
supply
leads 2
(for main
unit)
supply
leads 2
(for main
unit)
Active subwoofer
(optional)
(optional)
Rear speakers
(optional)
(optional)
Front speakers
(optional)
(optional)
To game
etc.
etc.
To rear
monitor etc.
monitor etc.
To the optional
back camera or a
video equipment
back camera or a
video equipment
From car antenna
Connecting without optional TV tuner unit (Except Russian)
RC-104 (optional)
digital output
digital output
Protection device
(US, Canadian)
10
Connecting with optional TV tuner unit (Except Russian)
AUX 3
To the +12 V power
terminal which is
energized in the
accessory position of the
ignition key switch. Be
sure to connect the black
ground lead first.
terminal which is
energized in the
accessory position of the
ignition key switch. Be
sure to connect the black
ground lead first.
TV tuner unit
XT-V70
(optional)
XT-V70
(optional)
Connection box 1
To XM tuner (optional)
To a metal point
of the car
of the car
To the optional back camera
or a video equipment
or a video equipment
Tuner
amplifier
unit
amplifier
unit
Antenna cord
Film antenna
(US, Canadian)
9
FRONT L/R
REAR L/R
SUB OUT (MONO)
REAR MONITOR OUT
AUX 2
AUX 3
1 3 5 7
2 4 6 8
5 7
4 6 8
Front speakers
(optional)
(optional)
Rear speakers
(optional)
(optional)
RCA interconnects
(optional)
(optional)
RCA interconnects
(optional)
(optional)
RCA interconnects
(optional)
(optional)
Amplifiers
(optional)
(optional)
This terminal is not
used in this case.
used in this case.
Power
supply
leads 1
(for main
unit)
supply
leads 1
(for main
unit)
Active subwoofer
(optional)
(optional)
To game etc.
To rear
monitor etc.
monitor etc.
To the optional
back camera or
video
back camera or
video
From car aerial*
Connecting without optional TV tuner unit (Russian only)
RC-104 (optional)
digital output
digital output
Blue/white
Max. supply current 0.3 A
A
AMP REM
C
from the car’s speaker connector
D
from the car’s power connector
See “Power connection diagram”
on next page for details.
on next page for details.
Fuse
(10 A)
(10 A)
!
" # $ $
% ! # $
% &%$'
C
from the car’s speaker connector
D
from the car’s power connector
() &
$ ) $
*
*
)
&
+, $)
&%
-
)
$
%
$)
&% ) $
! *&
$
$ % %
#
$'
A
To AMP REMOTE IN of an optional power amplifier
.
$ &&
$ -
$' /&
$$
- - %-
'
Warning
0 # ) ) 12 && $ ) $ % )
0 # ) ) 12 && $ ) $ % )
$ %$ 1 - %-
'
Light green (2.5 m)
Parking brake
switch lead of car
switch lead of car
Aerial adaptor qd
* Note for the aerial connecting
0 &
$ 0+ 30
+
4
%%
4
5
$
$
% %
qd
&&
'
$
&&
&
$
% %
qd
&&
6&
-
'
Purple/White (5m)
To the + 12 V power terminal of the
back lamp lead of car
back lamp lead of car
Protection device
10
Connecting with optional TV tuner unit (Russian only)
AUX 3
To the +12 V power terminal which is
energized in the accessory position of the
ignition key switch. Be sure to connect the
black ground lead first.
energized in the accessory position of the
ignition key switch. Be sure to connect the
black ground lead first.
TV tuner unit
XT-V70
(optional)
XT-V70
(optional)
To a metal point
of the car
of the car
To the optional back camera
or video
or video
Tuner
amplifier
unit
amplifier
unit
Aerial cord
Film aerial
Power connection diagram
Auxiliary power connector may vary depending on the car. Check your car’s auxiliary power connector
diagram to make sure the connections match correctly. There are three basic types (illustrated below). You
may need to switch the positions of the red and yellow leads in the car stereo’s power connecting cord.
After matching the connections and switched power supply leads correctly, connect the unit to the car’s
power supply. If you have any questions and problems connecting your unit that are not converted in
this manual, please consult the car dealer.
diagram to make sure the connections match correctly. There are three basic types (illustrated below). You
may need to switch the positions of the red and yellow leads in the car stereo’s power connecting cord.
After matching the connections and switched power supply leads correctly, connect the unit to the car’s
power supply. If you have any questions and problems connecting your unit that are not converted in
this manual, please consult the car dealer.
A
Red
Yellow
B
Red
Yellow
Red
Yellow
4 Yellow
switched power supply
7 Red
continuous power supply
C
Red
Yellow
Red
Yellow
the car without ACC position
4 Yellow
continuous power supply
7 Red
switched power supply
Auxiliary power connector
Red
Yellow
Click on the first or last page to see other XAV-A1 service manuals if exist.