Read Sony MV-900SDS / XVM-R90D Service Manual online
6
XVM-R90D
Where to install
Before installing this unit, please check your local traffic rules and regulations. Follow the diagram
below to install this unit in a suitable position in your car.
below to install this unit in a suitable position in your car.
Do not install this unit where:
— It will obstruct the driver’s view when the
monitor is in either the open or closed
position.
position.
— It will obstruct the operation of the airbag
system.
— It will obstruct the operation of the
vehicle, especially the steering wheel, shift
lever, or brake pedal.
lever, or brake pedal.
— A driver or passengers may injure
themselves when getting into or out of the
car.
car.
If you have any questions or problems
concerning your unit that are not covered
in this manual, please consult your
nearest Sony dealer.
concerning your unit that are not covered
in this manual, please consult your
nearest Sony dealer.
Before installing
Make sure that the POWER SELECT switch is
set to the correct position.
set to the correct position.
A*: If your car has an accessory position on
the ignition key.
B : If your car has no accessory position on
the ignition key.
*
A is the factory preset position.
When the POWER SELECT switch is
set to
set to
B
Press (POWER) on the player to turn on.
The player does not turn on by pressing
(POWER)
The player does not turn on by pressing
(POWER)
on the card remote commander.
Note
Be sure to turn off the player after driving your
car.
To turn off the player, follow the operations
below:
– Press (POWER) on the player.
– Press (POWER) on the card remote commander.
If the power is left on, it will cause battery drain.
Be sure to turn off the player after driving your
car.
To turn off the player, follow the operations
below:
– Press (POWER) on the player.
– Press (POWER) on the card remote commander.
If the power is left on, it will cause battery drain.
B
A
POWER SELECT
switch
Connections
Installation diagram
Refer to the installation diagram and ask a qualified technician for the installation of the unit.
XVM-R90D
Front Left
speaker
speaker
Rear Left
speaker
speaker
Subwoofer
Tweeter Left
Head unit
Front Right
speaker
speaker
Rear Right
speaker
speaker
Be sure to securely fasten all equipment to
the car chassis, etc., to prevent them
moving while your car is in motion.
the car chassis, etc., to prevent them
moving while your car is in motion.
Note
All equipment other than one DVD player is
optional.
All equipment other than one DVD player is
optional.
Tweeter Right
Connection diagram
Refer to the connection diagram for the proper connections.
Note
Set the POWER SELECT switch before installing (page 6).
Set the POWER SELECT switch before installing (page 6).
Optical cable
(not supplied)
(not supplied)
AUDIO/VIDEO OUTPUT
From the car aerial
Car audio
(optional)
Aerial connector*
1
Speaker system
(optional)
(optional)
*
1
An adapter (optional) may be necessary for your
car and car audio system. In such a case, consult
your dealer.
car and car audio system. In such a case, consult
your dealer.
*
2
If your car has no ACC (accessory) position on
the ignition key switch, set the POWER SELECT
switch to
the ignition key switch, set the POWER SELECT
switch to
B (page 6) and connect this ACC cable
to the +12 V power (battery) terminal.
Relay box
5 m
Amplifier equipped
with a digital input
(optional)
with a digital input
(optional)
0.5 m
On AUDIO/VIDEO OUTPUT
connectors
connectors
You can connect a Monitor to the AUDIO/
VIDEO OUTPUT connectors to output the
contents being played back on the player.
VIDEO OUTPUT connectors to output the
contents being played back on the player.
RCA pin cord (not supplied)
GND (1 m)
Back-up (5 m)
To a metal surface
of the car chassis
of the car chassis
To car battery
(12 V)
(12 V)
To ignition switch*
2
(ACC position)
4 Pin Power connector
ACC (5 m)
Fuse (5 A)
Fuse (1 A)
Red
Yellow
Black
GND (1 m)
POWER REM (5 m)
Blue
Max. supply current 0.3 A
To a power
amplifier
amplifier
Black
Filter box
AUDIO/VIDEO INPUT
On AUDIO/VIDEO INPUT connectors
You can connect a VTR, etc. to the AUDIO/
VIDEO INPUT connectors to input the
contents being played back on the device.
VIDEO INPUT connectors to input the
contents being played back on the device.
RCA pin cord (not supplied)
Click on the first or last page to see other MV-900SDS / XVM-R90D service manuals if exist.