Read Sony MEX-XB100BT Service Manual online
MEX-XB100BT
30
3-9. TUNER UNIT (TUX-DSP04)
3-10. HOW TO INSTALL THE KNOB (VOL) (SV) ASSY
:LUHVHWWLQJ
tuner unit
(TUX-DSP04)
(TUX-DSP04)
wire
J001
MAIN board
1 Remove the solder.
3 tuner unit
(TUX-DSP04)
(TUX-DSP04)
2 Remove the solder.
Note 1: When the knob (VOL) (SV) assy is replaced, Bluetooth informa-
tion writing is necessary. Refer to“BLUETOOTH INFORMA-
TION WRITING METHOD” on page 9.
TION WRITING METHOD” on page 9.
2 Align two shafts and two grooves.
Since the position of the groove to rotate, check
the position of the groove when attach the shaft.
3 Confirm a top and bottom
direction of NFC logo.
4 Push until the clicking sound is heard.
knob (VOL) (SV) assy
front panel assy
cushion
(knob)
(knob)
1 Make sure that the cushion (knob) is installed
correctly.
Note 2: When pushed by a strong force there is a risk
of damage to the inside of the switch.
Push in the appropriate force, be careful not
to push too strongly.
OK
NG
knob
(VOL)
(VOL)
cushion
(knob)
(knob)
knob
(VOL)
(VOL)
two shafts
two grooves
Click on the first or last page to see other MEX-XB100BT service manuals if exist.