Read Sony MEX-N4100BE / MEX-N4100BT / MEX-N4150BT Service Manual online
MEX-N4100BE/N4100BT/N4150BT
18
Installation
Before installing the unit, remove the protection
collar
collar
ͨ and the bracket ʓ from the unit.
1
Pinch both edges of the protection collar
ͨ, then pull it out.
2
Insert both release keys
ͧ until they
click, and pull down the bracket
ʓ, then
pull up the unit to separate.
Removing the protection collar and the
bracket
bracket
ͨ
ʓ
ͧ
Face the hook inwards.
1
To enable the wired remote control, set
[STR CONTROL] in [SET STEERING] to
[EXTERNAL] (page 17).
[STR CONTROL] in [SET STEERING] to
[EXTERNAL] (page 17).
Using the wired remote control
Before installing, make sure the catches on both
sides of the bracket
sides of the bracket
ʓ are bent inwards 2 mm (
3
/
32
in).
1
Position the bracket
ʓ inside the
dashboard, then bend the claws outward
for a tight fit.
for a tight fit.
Mounting the unit in the dashboard
ʓ
182 mm (7
1
/
4
in)
53 mm (2
1
/
8
in)
Catch
When replacing the fuse, be sure
to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse blows
again after replacement, there
may be an internal malfunction. In such a case,
consult your nearest Sony dealer.
to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse blows
again after replacement, there
may be an internal malfunction. In such a case,
consult your nearest Sony dealer.
Fuse replacement
Fuse (10 A)
.
2
Mount the unit onto the bracket
ʓ, then
attach the protection collar
ͨ.
Notes
ˎ If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
ˎ Make sure the 4 catches on the protection collar ͨ
are properly engaged in the slots of the unit.
ʓ
ͨ
ͩ
ͪ
Click on the first or last page to see other MEX-N4100BE / MEX-N4100BT / MEX-N4150BT service manuals if exist.