Read Sony MEX-GS600BT Service Manual online
MEX-GS600BT
6
EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this unit, connect the jig cable (exten-
sion cable (CD mecha)) as shown below.
When repairing or servicing this unit, connect the jig cable (exten-
sion cable (CD mecha)) as shown below.
• Connect the MAIN board (CN700) and the SERVO board
(CN401) with the jig cable.
Jig cable:
Part No.
Part No.
Description
A-1818-424-A
EXTENSION CABLE (CD MECHA)
SERVO board
(CN401)
(CN401)
MAIN board
(CN700)
(CN700)
extension cable (CD mecha)
MODEL IDENTIFICATION
– Bottom View –
Part No.
Model Number Label
Part No.
Destination
4-436-324-0[]
US and Canadian models
4-436-325-0[]
AEP and UK models
NOTE FOR REPLACEMENT OF THE AUX JACK (J901)
To replace the AUX jack requires alignment.
1. Insert the AUX jack into the front panel.
2. Place the KEY board on the front panel and align the terminals
To replace the AUX jack requires alignment.
1. Insert the AUX jack into the front panel.
2. Place the KEY board on the front panel and align the terminals
of the AUX jack with the holes in the KEY board.
3. Solder three terminals of the jack.
KEY board
front panel
AUX jack
(J901)
(J901)
Ver. 1.1
Click on the first or last page to see other MEX-GS600BT service manuals if exist.