Read Sony MEX-BT4700U / MEX-BT4750U Service Manual online
MEX-BT4700U/BT4750U
MEX-BT4700U/BT4750U
19
19
3-11. SLED MOTOR ASSY
3-12. OPTICAL PICK-UP BLOCK
3-13. OPTICAL PICK-UP
sled motor assy
sled motor assy
spring
spring
stand
(bottom view)
(bottom view)
stand
turn table
three serration screws
(M
(M
2
× 3)
three
serration
screws
(M
2
× 3)
Note 1: Place the stand with care not to touch the turn table.
Note 2:
Never remove these parts since they were adjusted.
Never remove these parts since they were adjusted.
Note for Assembly
Note 3: Take care to prevent the chassis from being bent
when tightening the three machine screws.
bearing (F)
bearing (R)
optical pick-up block
Note: Be careful not to touch the lens and hologram
terminal when removing the optical pick-up block.
(bottom view)
There is space at the end of the
leaf spring (sub guide) to avoid
contact with the slide.
leaf spring (sub guide) to avoid
contact with the slide.
pan tapping screw
(M
(M
1.4
× 2.5)
leaf spring (sub guide)
leaf spring (OP)
optical pick-up
lead screw assy
Notes for Assembly
Prevent the end of the
leaf spring (sub guide) from being
in contact with the OP slide base.
leaf spring (sub guide) from being
in contact with the OP slide base.
Prevent the end of the
leaf spring (sub guide) from being
in contact with the OP slide base.
leaf spring (sub guide) from being
in contact with the OP slide base.
(bottom view)
Click on the first or last page to see other MEX-BT4700U / MEX-BT4750U service manuals if exist.