EXR-C205, XR-C340 - Sony Car Audio Service Manual (repair manual). Page 15

Read Sony EXR-C205 / XR-C340 Service Manual online

– 15 –
SECTION  5
ELECTRICAL  ADJUSTMENTS
SECTION  4
MECHANICAL  ADJUSTMENTS
1. Clean the following parts with a denatured-alcohol-moistened
swab:
playback head
pinch roller
rubber belt
capstan
idlers
2. Demagnetize the playback head with a head demagnetizer.
3. Do not use a magnetized screwdriver for the adjustments.
4. After the adjustments, apply suitable locking compound to the
parts adjusted.
5. The adjustments should be performed with the power supply
voltage unless otherwise noted.
 Torque  Measurement
Mode
Torqu Meter
Meter Reading
Forward
CQ-403A
more than 90 g
(more than 3.18 oz)
Reverse
CQ-403R
more than 90 g
(more than 3.18 oz)
 Tape Tension  Measurement
set
+
test tape
WS-48A
(3 kHz, 0 dB)
speaker out terminal
speed checker
or
frequency counter
0 dB=0.775 V
TAPE  DECK  SECTION
Tape Speed Adjustment
Procedure:
1. Put the set into the FWD PB mode.
Speed checker
Frequency counter
–1.5 to +2.5%
2,955 to 3,075 Hz
Specification: Constant speed
Adjustment Location:
– SET  UPPER  VIEW –
TAPE  SPEED  Adjustment
Mode
Torqu Meter
Meter Reading
Forward
CQ-102C
30–65 g•cm
(0.42–0.90 oz•inch)
Forward
CQ-102C
0.5–4.5 g•cm
Back Tension
(0.01–0.06 oz•inch)
Reverse
CQ-102RC
30–65 g•cm
(0.42–0.90 oz•inch)
Reverse
CA-102RC
0.5–4.5 g•cm
Back Tension
(0.01–0.06 oz•inch)
FF, REW
CQ-201B
60–200 g•cm
(0.83–2.78 oz•inch)
Page of 29
Display

Click on the first or last page to see other EXR-C205 / XR-C340 service manuals if exist.