Read Sony DSX-S210X / DSX-S310BTX Service Manual online
DSX-S210X/S310BTX
5
NOTE FOR REPLACEMENT OF THE USB CONNEC-
TOR (CN900)
To replace the USB connector jack requires alignment.
1. Insert the USB connector into the front panel.
2. Place the DISPLAY board on the front panel and align the ter-
TOR (CN900)
To replace the USB connector jack requires alignment.
1. Insert the USB connector into the front panel.
2. Place the DISPLAY board on the front panel and align the ter-
minals of the USB connector with the holes in the DISPLAY
board.
board.
3. Solder the three terminals of the connector.
DISPLAY board
USB connector
front panel
NOTE FOR CHECKING THE MAIN BOARD
If removing the MAIN board from the chassis to check it sepa-
rately without attaching the front panel, hold the detach detection
switch (S702) ON by using tape or the like, and then start opera-
tions.
If removing the MAIN board from the chassis to check it sepa-
rately without attaching the front panel, hold the detach detection
switch (S702) ON by using tape or the like, and then start opera-
tions.
– MAIN Board (Component Side) –
S702
tape
Click on the first or last page to see other DSX-S210X / DSX-S310BTX service manuals if exist.