Read Sony CX-LFAV500 / XR-FAV500 Service Manual online
5
CX-LFAV500
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
PARTS AND CONTROLS
Main unit: front
Refer to the pages indicated in parentheses for details.
1
5
2
3
4
7
8
9
9
0
6
1
POWER
6
STANDBY/ON (8)
Switches the unit on and off (standby).
ECO (8)
Sets the ECO mode on or off.
DISPLAY (10, 14)
Changes the display in CD playback mode.
2
MIC jack
Plug in an optional microphone with a stereo mini plug
(ø3.5 mm).
(ø3.5 mm).
3
PHONES jack
Plug in optional headphones set with a stereo mini plug
(ø3.5 mm). Speaker output is cancelled.
(ø3.5 mm). Speaker output is cancelled.
4
SYNCHRO REC (19)
Starts recording and CD play simultaneously.
w
REC START/REC PAUSE (19)
Starts and pauses recording.
5
BASS (9)
Adjusts the bass level.
TREBLE (9)
Adjusts the treble level.
6 E
CD/SELECT (8, 10-14)
Starts and pauses CD play.
TUNER/BAND (8, 16)
Selects tuner function and the tuner band.
d
TAPE (REC MUTING) (8, 18, 19)
Starts playback and changes the playback side.
Also used to enter 4-second blank spaces during
recording.
Also used to enter 4-second blank spaces during
recording.
AUX (8)
Selects the function of external equipment connected to
AUX IN jacks.
AUX IN jacks.
7 z
OPEN/CLOSE (10)
Opens or closes the disc compartment.
8 s
/CLEAR/
O
RETURN (10-14, 18, 19)
CD and Tape: stops playback.
f
/
r-
PREVIOUS, NEXT
+t
/
g
(8-10, 12-14, 16, 18, 20-23)
CD: skips to a previous or a succeeding track when
pressed, searches a track in fast forward or reverse
playback when held down.
Tape: rewinds or fast forwards the tape.
Tuner: manually tunes up or down within the band.
pressed, searches a track in fast forward or reverse
playback when held down.
Tape: rewinds or fast forwards the tape.
Tuner: manually tunes up or down within the band.
9 z
PUSH EJECT (18, 19)
Opens or closes the cassette holder.
0
VOLUME (9, 22)
Adjusts the volume.
En
Main unit: rear
Refer to the pages indicated in parentheses for details.
1
2
3
4
4
5
7
6
1
AM LOOP terminal and FM 75
Ω
terminal
(4)
Plug in the supplied AM and FM antennas.
2
AUX IN jacks
Accept analogue sound signals from external equipment.
Connect external equipment using an optional connecting
cable with RCA phono plugs (red plug to R jack, white
plug to L jack). Refer also to the operating instructions
for your equipment.
To switch function to external input, press AUX.
To change a source name in the display of the
AUX function
Hold down AUX and press POWER while the power is
on.
Connect external equipment using an optional connecting
cable with RCA phono plugs (red plug to R jack, white
plug to L jack). Refer also to the operating instructions
for your equipment.
To switch function to external input, press AUX.
To change a source name in the display of the
AUX function
Hold down AUX and press POWER while the power is
on.
AUX
VIDEO
TV
3
SUB WOOFER
3
jack
Connect optional powered sub woofer with a built-in
amplifier to the jack.
amplifier to the jack.
4
SPEAKERS
3
terminals (4)
Connect the speaker cords of the supplied speakers.
5
AC power cord (4)
6
VIDEO OUT jack (4)
Outputs video signals.
Connect to the video input jack of your TV set with the
supplied video connecting cord. Select the appropriate
video input on your TV. Refer to the operating instructions
of your TV.
Connect to the video input jack of your TV set with the
supplied video connecting cord. Select the appropriate
video input on your TV. Refer to the operating instructions
of your TV.
NTSC/AUTO/PAL switch (4)
Sets the color system of the video signal output via the
VIDEO OUT jack. Turn off the power, and then set the
switch according to your TV set:
VIDEO OUT jack. Turn off the power, and then set the
switch according to your TV set:
- NTSC: When connecting to an NTSC system TV.
- AUTO: When connecting to a multi color system TV.
- PAL: When connecting to a PAL system TV.
•In case of setting the switch to "
AUTO", you need to
adjust the color system according to your VCD to play
back. Hold down SHIFT and SLOW for about 6 seconds
in stop mode in CD function, and "
back. Hold down SHIFT and SLOW for about 6 seconds
in stop mode in CD function, and "
PAL" (initial) or
"
NTSC" appears on the display (except when the
loaded disc is MP3-CD).
When playing back a PAL VCD, hold down SHIFT and
SLOW and then release them when "
SLOW and then release them when "
PAL" appears.
When playing back an NTSC VCD, do the same
procedure and release it when "
procedure and release it when "
NTSC" appears.
When the function is changed or the unit is turned off,
PAL is restored.
PAL is restored.
•This unit does not support color system other than
PAL and NTSC, such as NTSC 4.43 or SECAM.
•If there is a color or picture trouble in the AUTO mode,
select NTSC or PAL.
7
AC VOLTAGE selector (3)
Switches AC voltage between 120V, 220 and 230-240V.
Make sure it matches your local voltage.
Make sure it matches your local voltage.
Click on the first or last page to see other CX-LFAV500 / XR-FAV500 service manuals if exist.