Read Sony CDX-M800 (serv.man2) Service Manual online
16
CDX-M800
3-3. MOTOR BLOCK
3-4. ALIGNMENT BETWEEN ARM (A-L) ASSY
AND ARM (B-L) ASSY
AND ARM (B-L) ASSY
1
Turn the cam (L) and position the cam so that part
A
does not touch the SW board SW900.
1
Input 9V DC to the motor terminal until the cam (L)
stops rotating.
Take care to avoid overload of the motor.
stops rotating.
Take care to avoid overload of the motor.
2
Verify that the arm (A-L) assy and arm (B-L) assy
are positioned as shown below (full open).
3
PTT 2.6x6
4
PTT 2.6x6
5
PTT 2.6x6
2
motor block
SWITCH board
SW900
cam (L)
A
motor
GND
arm (B-L) assy
arm (A-L) assy
DC 9V
+B
Click on the first or last page to see other CDX-M800 (serv.man2) service manuals if exist.